@article { author = {Dehghanisanij, Hossein and Zounemat-Kermani, Mohammad and Asadi, Rasoul}, title = {Application of Municipal Wastewater in Irrigation of Corn under Furrow and Drip Irrigation Systems}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {423-429}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Municipal wastewater is marginal quality water and using this for irrigation can an important consideration with its disposal is being planned in arid and semi-arid region. Therefore, in order to investigate the effect of furrow and drip irrigation systems on yield, yield components and water use efficiency of corn with using municipal wastewater, a field experiment was carried out during 2012 growing season at experimental farm of Jopar Agriculture Research in Kerman province. The treatments were laid out in split plot a Randomized Complete Block Design (RCBD) design with three replications. The treatments were comprised of four different irrigation, including, T1: furrow irrigation for groundwater, T2: furrow irrigation for wastewater, T3: drip irrigation for groundwater and T4: drip irrigation for wastewater. The results showed, using wastewater led to reduced pH and increase Fe, Zn and Ec. Also In comparison with drip irrigation, furrow irrigation caused parsimony of water usage equal 2100 m3 ha-1, Also the maximum of yield, water use efficiency, 1000-grain weight and number of seeds in a row content observed in drip irrigation for wastewater treatment about 11.23 kg/h, 1.44 kh/m3, 303.78 gr and 49 respectively, but number of rows of seed increase in drip irrigation for groundwater. Therefore, due to the problem of water supply to plant species in the arid and semi-arid regions, nutrient present in wastewater using this, can have a significant role in the stability of plants, reducing costs of irrigation and fertilizers and reduce environmental pollution.  }, keywords = {Wastewater,Groundwater,Furrow irrigation,Drip Irrigation,Corn}, title_fa = {کاربرد پساب در آبیاری زراعت ذرت با استفاده از سیستم‌های آبیاری شیاری و قطره‌ای}, abstract_fa = {فاضلاب شهری از جمله منابع آب غیرمتعارف است که امکان استفاده از آن در آبیاری محصولات کشاورزی حائز اهمیت است. کاربرد این منابع آبی با روش­های آبیاری قطره­ای زیرسطحی به علت توجه به مسایل زیست محیطی بیش­تر توصیه شده است. در این تحقیق کاربرد فاضلاب تصفیه شده شهری توسط دو سیستم آبیاری شیاری و قطره­ای بر شاخص­های رشد و عملکرد ذرت­دانه­ای مورد بررسی قرار گرفت. در این آزمایش که به­صورت کرت­های خرد شده و در قالب طرح بلوک­های کامل تصادفی، 4 تیمار (1T= آبیاری شیاری با آب چاه، 2T= آبیاری شیاری با پساب، 3T= آبیاری قطره­ای با آب چاه و 4T= آبیاری قطره­ای با پساب) و در سه تکرار در مزرعه تحقیقاتی جوپار کرمان در دو سال زراعی 1389 و 1390 مورد مقایسه قرار گرفتند. نتایج نشان داد کاربرد پساب منجر به کاهش pH و افزایش آهن، روی و EC خاک مورد مطالعه شد. هم­چنین کاربرد پساب در سیستم آبیاری قطره­ای منجر به افزایش معنی‌دار عملکرد، کارایی مصرف آب، وزن هزار دانه و تعداد دانه در ردیف بلال نسبت به سایر تیمارها شده است. به‌طوری­که بیش­ترین مقادیر صفات مزبور که در تیمار 4T به­دست آمدند، به­ترتیب 2/11 کیلوگرم در هکتار، 44/1 کیلوگرم بر مترمکعب، 87/303 گرم و 49 عدد اندازه­گیری گردید. میزان صرفه­جویی آب در سیستم آبیاری قطره­ای نسبت به شیاری در حدود 2100 مترمکعب در هکتار بود، لذا سیستم آبیاری قطره­ای ضمن افزایش عملکرد می­تواند در کاهش آلودگی زیست محیطی ناشی از عناصر موجود در آب مؤثر باشد. }, keywords_fa = {آب چاه,آبیاری شیاری,آبیاری قطره‌ای,پساب و ذرت‌دانه‌ای}, url = {https://idj.iaid.ir/article_55644.html}, eprint = {https://idj.iaid.ir/article_55644_ec462fb2228bf34be85f2a317597e654.pdf} } @article { author = {Ahmadi, Hojat and Rezaverdinejad, Vahid}, title = {Investigation on the Effects of Hydraulic Conductivity Function in Unconfined Seepage Analysis (Case study: Hassanlu Earth Dam)}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {430-442}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {In this research the emphasis of the application of hydraulic conductivity function in seepage analysis through in homogenous and nonhomogeneous medium was investigated. For this aim, different forms of flow in mentioned mediums were analyzed via a finite element numeric model based on hydraulic properties were selected from unsaturated soils database (UNSODA). In order to validate the results annual recorded data in Hassanlu earth dam was used.  The results showed, in nonhomogeneous medium as well as zoned earth dams, the role of downstream material is more significant. Furthermore, the phreatic line in the state of employing constant conductivity in instead in conductivity function rises rapidly in the conditions of rising water lever at the boundaries while in drawdown it drain faster. Comparison between filed data and model results also showed to get realistic results employing of hydraulic conductivity in the form function is essential at least for downstream materials.  }, keywords = {Hydraulic Conductivity Function,Material,Earth Dam,Seepage}, title_fa = {بررسی تأثیر تابع هدایت هیدرولیکی در تحلیل نشت غیر محصور (مطالعه موردی سد خاکی حسنلو)}, abstract_fa = {در این تحقیق اهمیت به­کارگیری توابع نفوذپذیری در تحلیل نشت دائم و غیر دائم (انتقالی) غیر محصور در محیط­های همگن و غیر همگن بررسی شد. برای این منظور حالات مختلف جریان در محیط­های همگن و غیر همگن با لحاظ خصوصیات هیدرولیکی مصالح مستخرج از بانک اطلاعاتی خاک­های غیر اشباع (UNSODA) و به کمک یک مدل کامپیوتری مبتنی بر روش اجزای محدود مطالعه شد. برای اعتبار­سنجی نتایج این تحلیل، از داده‌های ابزار دقیق ثبت شده­ی سد حسنلو طی دوره یکساله استفاده گردید. نتایج بررسی­ها نشان داد که در محیط غیر همگن و سدهای ناحیه­بندی شده، خصوصیات هیدرولیکی مصالح پایین دست نسبت به مصالح بالادست بر موقعیت سطح نشت مؤثرتر است. هم­چنین طبق یافته‌های تحقیق، موقعیت سطح نشت در شرایط به­کارگیری هدایت هیدرولیکی ثابت نسبت به هدایت هیدرولیکی متغیر در شرایط بالا آمدن سطح آب در مخزن رشد آهسته­تری داشته و در عین حال در شرایط پایین افتادن سطح آب در مخزن، سرعت زهکشی مصالح بیش­تر می­باشد. مقایسه داده­های واقعی ثبت شده با نتایج مدل نشان می‌دهد که جهت حصول نتایج واقع بینانه لازم است خصوصیات هیدرولیکی مصالح به­صورت تابع هدایت هیدرولیکی تعریف گردد یا اینکه حداقل برای مصالح پایین دست این شرایط رعایت شود.  }, keywords_fa = {تابع هدایت هیدرولیکی,مصالح,سد خاکی,نشت}, url = {https://idj.iaid.ir/article_55647.html}, eprint = {https://idj.iaid.ir/article_55647_0aee7cc54da566c88fe72152e39193fd.pdf} } @article { author = {Noorabadi, Saeid and Sadraddini, Seyed Ali Ashraf and Nazemi, Amir Hossein and Delirhasannia, Reza}, title = {Application of the SIRMOD and HYDRUS-3D Models to Completely Simulate the Furrow Irrigation Process}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {443-452}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {SIRMOD as one of the widely used softwares for simulation of furrow irrigation uses Saint- Venant equations to describe different phases of furrow irrigation and Kostiakov-Lewis infiltration model to predict the infiltrated water volume during irrigation. The method of determining the coefficients of the infiltration equation, simplified assumptions for infiltration equation and considering infiltration as a one-dimensional phenomenon cause some effective factors in the infiltration process to be neglected. Therefore, using a software such as HYDRUS that uses Richards equation as basic water movement equation and considers many effective factors in infiltration, can increase the accuracy of predicted infiltrated water volume and consequently simulation accuracy. In this research, after conducting field experiments and recording related data, all phases of furrow irrigation were predicted using the SIRMOD and the results were introduced to the HYDRUS-3D as initial and boundary conditions to determine the infiltrated water volume using the Richards equation. Finally, the simulated values from two models were compared with the experimental data. Results showed that the complete hydrodynamic model in SIRMOD had high ability in the prediction of all phases of the irrigation, especially in advance phase and the HYDRUS-3D model simulated the infiltrated water volume and outflow hydrograph more accurately than SIRMOD model. Comparison of results from the models and measured values showed that incorporation of the two softwares would increase the accuracy of simulated infiltration and run-off values. In addition, the important advantage of this method is simulating soil water distribution during all irrigation phases.}, keywords = {Furrow irrigation,HYDRUS,Richards equation,Saint-Venant equations,Simulation,SIRMOD}, title_fa = {کاربرد مدل‌های SIRMOD و HYDRUS-3D برای شبیه‌سازی کامل فرایند آبیاری جویچه‌ای}, abstract_fa = {یکی از نرم افزارهای معروف برای شبیه­سازی آبیاری جویچه­ای نرم افزار SIRMOD می­باشد که از روابط سنت ونانت برای شبیه­سازی مراحل مختلف آبیاری جویچه­ای و از تابع نفوذ کوستیاکوف-لوئیس برای برآورد حجم آب نفوذیافته استفاده می­کند. روش تعیین ضرائب معادله نفوذ، در نظر گرفتن فرضیات ساده­ساز برای معادله نفوذ و یک بعدی فرض شدن پدیده نفوذ در نرم افزار مذکور باعث می­شود تا برخی از عوامل مؤثر در پدیده نفوذ نادیده گرفته شوند. بنابراین استفاده از نرم افزاری مانند HYDRUS که در آن از معادله ریچاردز به عنوان معادله اساسی جریان استفاده شده و بسیاری از عوامل مؤثر در پدیده نفوذ را در نظر می­گیرد، می­تواند دقت تخمین حجم آب نفوذیافته و در نتیجه دقت شبیه­سازی­ها را افزایش دهد. در این تحقیق پس از انجام آزمایش­های صحرایی و  ثبت داده­های مورد نظر، مراحل مختلف آبیاری جویچه­ای در نرم افزار SIRMOD شبیه­سازی شد و نتایج حاصل از آن به عنوان شرایط اولیه و مرزی وارد نرم افزار HYDRUS-3D گردید تا حجم آب نفوذیافته با استفاده از معادله ریچاردز به­دست آید. در نهایت مقادیر شبیه­سازی شده توسط دو مدل با مقادیر آزمایش­های عملی مقایسه گردید. نتایج نشان داد که مدل هیدرودینامیک کامل در SIRMOD توانایی بالایی در پیش­بینی مراحل مختلف آبیاری به­ویژه مرحله پیشروی دارد و مدل HYDRUS سه بعدی نیز حجم آب نفوذیافته و هیدروگراف جریان خروجی را با دقت بیش­تری در مقایسه با SIRMOD شبیه­سازی می­کند. مقایسه نتایج حاصل با مقادیر اندازه­گیری شده نشان داد کاربرد توام دو نرم افزار مذکور دقت شبیه­سازی مقادیر نفوذ و رواناب را افزایش می­دهد و مزیت مهم دیگر آن شبیه­سازی نحوه توزیع رطوبت خاک در تمامی مراحل آبیاری می­باشد.}, keywords_fa = {آبیاری جویچه‌ای,شبیه‌سازی,معادلات سنت ونانت,معادله ریچاردز,HYDRUS,SIRMOD}, url = {https://idj.iaid.ir/article_55650.html}, eprint = {https://idj.iaid.ir/article_55650_19980aee52eaeb73ec7e38ad425a2a14.pdf} } @article { author = {Ashrafi, Shahram and Sadrghaen, Seyed Hossein}, title = {Effects of Tape Drip Irrigation and Irrigation Levels on Yield of Corn (KSC 700-)}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {453-461}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Two years field experiment were carried out  in order to evaluate the effects of different irrigation levels, plant density and planting patterns on water productivity of corn (KSC700 variety) using tape drip irrigation system in Karaj. The experimental design was laid out as split plot design based on randomized complete blocks with three replications. Main plots were four irrigation levels: 50%, 75%, 100% and 125% ET and sub plots were three plant densities: 65000, 75000 and 85000 plants  per hectare and sub-sub plots were two planting patterns, one and two row plant per bed. Results showed that increasing the levels of irrigation from 50% to 125%, has a significant effects on yield, plant high, high of first corn, diameter of steam, diameter of corn, number of corn grain row, number of grain per row, biomass weight, length of corn, grain weight, weight of 1000 grain and weight of the corn wood. Results of two years experiments showed that grain yield increases by irrigation levels. The minimum and maximum yield values for 50% and 125% ET were 0.502, 12.53 and 3.46, 12.41 tons  per  hectare  in years of 2003 and 2004  respectively. The deviation in yield at irrigation levels of 50% and 125%ET had significant difference (α=1%) for both years. This means that, corn is a plant which is highly sensitive to deficit irrigation. The biomass and water use efficiency of 125% and 50% ET irrigation treatments had maximum and minimum values respectively which had significant differences at α=1% in both years. Considering the results obtained from this field experiment, in order to obtain maximum water productivity in areas where the water resources is limited, and areas where water resources are good, tape drip irrigation system can be used for corn production by applying 75% and 100% of the crop water  requirement, and one row  and two row planting patern with 75000 plant densities per hectare in both areas respectively}, keywords = {Tape Drip Irrigation,Crop Density,Crop Pattern,Corn,Water Use Efficiency}, title_fa = {اثر سطوح مختلف آب آبیاری بر عملکرد ذرت دانه‌ای رقم سینگل کراس 700 در آبیاری قطره‌ای}, abstract_fa = {به منظور ارزیابی اثرات کاربرد سطوح مختلف آب، تراکم بوته و آرایش کاشت  بر کارائی مصرف آب ذرت دانه­ای رقم سینگل کراس کرج 700  (KSC700) با استفاده از سامانه آبیاری قطره­ای با استفاده از نوار آبده طرحی با چهار سطح آبیاری، سه تراکم بوته و دو آرایش کاشت  طی دو سال در کرج انجام شد. طرح آماری مورد استفاده، کرت­های نواری خرد شده در قالب طرح بلوک­های کاملاً تصادفی در سه تکرار بود. کرت­های عمودی شامل چهار تیمار آبیاری 50، 75 ، 100 و 125 درصد تأمین نیاز آبی کامل و کرت­های افقی شامل سه تراکم 65، 75 و 85 هزار بوته در هکتار وکرت­های فرعی نیز شامل دو آرایش کاشت یک و دو ردیفه بود. نتایج به­دست آمده نشان داد که افزایش سطح آبیاری از 50 تا 125 درصد تأمین نیاز آبی اثر مطلوبی بر عملکرد دانه، ارتفاع گیاه، ارتفاع اولین بلال، قطر ساقه، قطر بلال، قطر چوب بلال، تعداد ردیف دانه، تعداد دانه در ردیف، وزن هزار دانه، وزن بیوماس، طول بلال، وزن دانه، قطر دانه و وزن چوب بلال داشت. عملکرد دانه با افزایش میزان آب مصرفی، افزایش یافته است به­طوری که سطح آبیاری 125 و 50 درصد تأمین نیاز آبی به ترتیب در سال­های اول و دوم با میانگین­ عملکرد 53/12، 502/0 و 41/12، 46/3 تن در هکتار بیش­ترین و کم­ترین عملکرد را به خود اختصاص دادند و در هر دو سال اختلاف معنی­داری در سطح 1%  از خود نشان دادند. این بدان معنی می­باشد که ذرت گیاهی است آب­دوست و در مقابل کم آبی یا تنش آبی بسیار حساس می­باشد. وزن ماده خشک وکارائی مصرف آب کلیه تیمارهای آزمایشی نشان داد  تیمارهائی که در گروه سطح آبیاری 125 درصد تأمین نیاز آبی قرار دارند با حداکثر مقدار و تیمارهائی که در گروه سطح آبیاری 50 درصد تأمین نیاز آبی قرار دارند حداقل مقدار را دارند و در هر دو سال اختلاف معنی­داری در سطح 1% داشتند. با عنایت به نتایج حاصله، در شرایطی که محدودیت منابع آبی وجود داشته باشد با تأمین 75 درصد نیاز آبی با سیستم آبیاری قطره­ای با استفاده از نوار آبده، با تراکم 75000 بوته در هکتار و آرایش کشت یک ردیف  و در شرایطی که محدودیت منابع آبی وجود نداشته باشد با تأمین100% نیاز آبی با تراکم 75000 بوته و آرایش کشت دو ردیف برای حصول حداکثر عملکرد دانه و کارائی مصرف آب قابل توصیه به کشاورزان می­باشد. }, keywords_fa = {آبیاری قطره‌ای با استفاده از نوار آبده,آرایش کاشت,تراکم بوته,عملکرد دانه,ذرت,کارائی مصرف آب}, url = {https://idj.iaid.ir/article_55652.html}, eprint = {https://idj.iaid.ir/article_55652_5522afa6e70881f0120f95a3383f8b68.pdf} } @article { author = {Ansari, Hossein and Azimi, Nima}, title = {Evaluating Effects of Deficit Irrigation and Different Nitrogen Levels on Quantity and Quality Parameters of Turf Grass (Lolium Prenne)}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {462-472}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {We evaluated the effects of different irrigation depths and nitrogen levels interactions on turf grass (Lollium perenne).  Current study was applied in Ferdowsi University with nitrogen treatments: without nitrogen-N0, N1 to the monthly requirement (1.83 grams per square meter) and N2 be two times monthly (3.66 grams per square meter) and five water treatments: W1- 44%, W2- 70%, W3- 85%, W4-100% and W5 equals to 110% water requirements. Finally, the NTEP turf quality with its height was measured and data were analyzed by software JUMP 4. The analysis of variance table shows that the effect of nitrogen level on grass is of a high quality. Treated water at 1% on height and 5 in turf quality are effective. Water and nitrogen interaction was significant at 5% level and the height of the grass quality was insignificant.}, keywords = {Turf grass,Line Source Irrigation System,Deficit irrigation,nitrogen,Lollium Perenne}, title_fa = {بررسی اثر کم آبیاری و سطوح مختلف نیتروژن بر برخی پارامترهای کمی و کیفی چمن لولیم پرنه}, abstract_fa = {در سال 1388 در تحقیقی در دانشکده کشاورزی دانشگاه فردوسی مشهد، اثر اعمال دو تیمار آب و نیتروژن بر روی چمن لولیوم پرنه مورد بررسی قرار گرفت. سه تیمار نیتروژن N0 بدون نیتروژن، N1 برابر نیاز ماهانه (83/1 گرم در مترمربع) و N2 دو برابر نیاز ماهانه (66/3 گرم در مترمربع) و پنج تیمار آب به ترتیب W1 برابر 44 درصد نیاز آبی، W2 برابر 70 درصد نیاز آبی، W3 برابر 85 درصد نیاز آبی، W4 برابر 100 درصد نیاز آبی و W5 برابر 110 درصد نیاز آبی در یک طرح آماری شبیه Split-Block  انتخاب شدند. مطابق طرح سیستم آبیاری تک شاخه‌ای هنکس تیمارهای آب در دو تکرار به موازات و در دو طرف خط آبیاری و تیمارهای نیتروژن در سه تکرار به­صورت عمود بر تیمارهای آب به­کار رفتند. نهایتاً کیفیت چمن طبق NTEP به همراه ارتفاع آن اندازه­گیری شد و داده­های حاصل توسط نرم افزارJUMP 4 آنالیز گردید. نتایج جدول تجزیه واریانس نشان­دهنده تأثیر نیتروژن در سطح یک درصد بر روی کیفیت و ارتفاع چمن می­باشد. تیمار آب در سطح 1 درصد بر روی ارتفاع و در سطح 5 در کیفیت چمن تأثیرگذار هستند. برهم­کنش آب و نیتروژن بر روی ارتفاع در سطح 5 درصد معنی­دار بوده و بر روی کیفیت چمن معنی­دار نشد.}, keywords_fa = {آبیاری,چمن لولیم پرنه,کم آبیاری,نیتروژن}, url = {https://idj.iaid.ir/article_55654.html}, eprint = {https://idj.iaid.ir/article_55654_391037bff93106253ece769aa2eedfb7.pdf} } @article { author = {Gholami Sefidkouhi, Mohammad Ali and Koulaian, Ali}, title = {Field Evaluation and Sensitivity Analysis of the SIRMOD Model in Furrow Irrigation}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {473-483}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Nowadays, Surface irrigation mathematical models are important for the evaluation and design purposes. In this study, mathematical models in the SIRMOD package including the Hydrodynamic (HD), Zero Inertia (ZI), and Kinematic wave (KW) models were evaluated and sensitized analysis. Three data series including light, medium, and heavy soil texture were used in this assessment. The results indicated that the performance of all models was satisfactory for the prediction of the advance times, but they predicted the advance times better than the recession times. The HD model predicted the advance and recession times better than the other models. The results showed that the accuracy of these models for the prediction of infiltrated and runoff volumes related to soil texture. Sensitivity analysis of the these models showed that the sensitivity of four irrigation parameters (Ea , Er , DU, and TWR) to five variables (qo , tco , k, a, and fo) higher than the other variables.}, keywords = {Surface irrigation,Sensitivity analysis,Hydraulic Models}, title_fa = {ارزیابی مزرعه‌ای و آنالیز حساسیت مدل SIRMOD در آبیاری شیاری}, abstract_fa = {امروزه استفاده از مدل‌های هیدرولیکی به‌منظور طراحی و ارزیابی آبیاری سطحی، دارای جایگاه ویژه می‌باشد. در این تحقیق مدل­های هیدرودینامیک کامل (HD)، اینرسی صفر (ZI) و موج سینماتیک (KW) موجود در بسته نرم­افزار SIRMOD مورد ارزیابی و تحلیل حساسیت قرار گرفت. بدین منظور، از سه سری داده مزرعه­ای با بافت سبک، متوسط و سنگین استفاده شد. نتایج نشان می‌دهد که تمامی مدل­ها زمان پیشروی را با دقت مناسب پیش­بینی می­نمایند ولی مرحله پسروی با دقت کم­تری نسبت به مرحله پیشروی پیش‌بینی می‌شود. هم­چنین مدل هیدرودینامیک کامل، زمان‌های پیشروی و پسروی را با دقت بیش­تری شبیه­سازی می­کند. یافته‌ها نشان داد که دقت پیش­بینی میزان نفوذ تجمعی توسط مدل‌ها،‌ تابع بافت خاک می­باشد به‌طوری‌که کم­ترین میانگین خطای مطلق متعلق به خاک با بافت متوسط می‌باشد. تحلیل حساسیت مدل­های هیدرولیکی نشان داد که پارامترهایی مانند دبی جریان، زمان قطع جریان و ضرایب معادله نفوذ تأثیر زیادی بر راندمان کاربرد، راندمان نیاز آبی، ضریب یکنواختی توزیع و نسبت رواناب پایاب دارد.}, keywords_fa = {آبیاری سطحی,تحلیل حساسیت,مدل‌های هیدرولیکی}, url = {https://idj.iaid.ir/article_55655.html}, eprint = {https://idj.iaid.ir/article_55655_e5382b10c9101a9fb8d30c7a944cefc7.pdf} } @article { author = {Bakhtiari, Bahram and Mohebbi Dehaghani, Ali Reza and Qaderi, Kouroush}, title = {Evaluation of Intelligent Data-Driven Models in Daily Reference Evapotranspiration Estimation in Climates of Southern Coasts of the Caspian Sea}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {484-495}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {In many studies accurate estimation of evapotranspiration parameter has special importance. Intelligent data-driven models have great potential in the modeling of complex and nonlinear phenomena. In this study reference evapotranspiration was  modeled by using of four data-driven method including Artificial Neural Networks (ANN), Support Vector Machines (SVM), model tree M5 and Adaptive Networks based on Fuzzy Inference System (ANFIS) with Long-term daily meteorological data in three synoptic stations of Climates of southern coast of the Caspian Sea. 11 different combinations of meteorological variables was chosen as input data-driven models and for evaluate the models many statistical were used such as correlation coefficient (R2), Root Mean Square of Error (RMSE) and index of agreement (DI). The Result that showed ANFIS-11 model  Was provided best estimations with RMSE between 0.2 ~ 0.38 mm day-1 and models with single-input wind speed was presented poorest estimations with RMSE between 1.35 ~ 1.68 mm day-1 and R2 between 0.02 ~ 1.68 in climates studied.}, keywords = {ANFIS,ANN,Daily Reference Evapotranspiration,M5,SVM}, title_fa = {ارزیابی مدل‌های هوشمند داده محور در برآورد تبخیر- تعرق مرجع روزانه در چند اقلیم سواحل جنوبی دریای خزر}, abstract_fa = {در بسیاری از مطالعات تعیین میزان دقیق متغیر تبخیر-تعرق از اهمیت ویژه‌‍‌ایی برخوردار است. مدل‌های هوشمند داده محور دارای توانایی بالایی در مدل­سازی پدیده‌های پیچیده و غیرخطی هستند. در این مطالعه از چهار روش داده محور شامل شبکه‌های عصبی مصنوعی (ANN)، ماشین‌های بردار پشتیبان (SVM)، مدل درختی M5 و شبکه‌های تطبیقی مبتنی بر سیستم استنتاج فازی (ANFIS) برای مدل‌سازی تبخیر-تعرق مرجع (ETo) در سه ایستگاه از اقلیم‌های سواحل جنوبی دریای خزر با استفاده از داده‌های بلند مدت روزانه هواشناسی بهره گرفته شد. 11 ترکیب مختلف متغیر‌های هواشناسی به عنوان ورودی به مدل‌های داده محور انتخاب گردید و از شاخص‌های استاندارد آماری ضریب تبیین (R2)، ریشه میانگین مربعات خطا (RMSE) و شاخص توافق (DI) برای ارزیابی مدل‌ها استفاده شد. نتایج نشان داد که مدل ANFIS-11 با RMSE بین 2/0 تا 38/0 میلی­متر بر روز دقیق‌ترین و مدل‌هایی که ورودی آن­ها فقط سرعت باد است با R2بین 02/0 تا 39/0 و RMSE بین 35/1 تا 68/1 میلی­متر بر روز ضعیف‌ترین برآوردها را در اقلیم‌های مورد مطالعه دارند.}, keywords_fa = {تبخیر-تعرق مرجع روزانه,SVM,M5,ANFIS,ANN}, url = {https://idj.iaid.ir/article_55656.html}, eprint = {https://idj.iaid.ir/article_55656_cefe89a0af431cfceac8e75628afac3a.pdf} } @article { author = {Rajaee, Taher and Jafari, Hamideh}, title = {Wavelet and ANN Combination Model for Prediction of Sulfate and Chloride Concentrations in Rivers (Case Study: Dez River)}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {496-509}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {One of the most important factors in sustainable development of watersheds is suitable water resources availability in terms of quantity and quality. This study considered artificial neural network (ANN), wavelet analysis and ANN combination (WANN), multi linear regression (MLR) models for monthly Sulfate (SO4) and Chloride (Cl) modeling in the Dez River Bamdezh station and investigates the effects of data preprocessing on model performance using discrete wavelet. For this purpose, wavelet analysis and ANN model, observed time series of river discharge and SO4 and Chloride were decomposed at different scales by wavelet analysis. Then, total effective time series of discharge and SO4(Cl) were imposed as inputs to the neural network model for prediction of SO4(Cl) in one-month- ahead. Results showed that the WANN model performance was better in prediction rather than the ANN and multi linear regression models. The wavelet analysis model produced reasonable predictions for the extreme values. This model dropped the mean absolute percentage error for the multi linear regression model and the ANN model for the Chloride modeling from 0.84 and 0.64, respectively, to 0.52, and SO4 modeling from 1.7 and 0.95, respectively, to 0.63. Furthermore, the model could be employed to simulate hysteresis phenomenon for SO4 modeling, while multi linear regression method is incapable in this event.}, keywords = {Artificial Neural Network,wavelet transform,Sulfate(SO4),Chloride(Cl),Dez river}, title_fa = {مدل ترکیبی موجک و شبکه عصبی برای پیش‌بینی غلظت سولفات و کلراید رودخانه‌ها (مطالعه موردی: رودخانه دز)}, abstract_fa = {از مهم­ترین عوامل مؤثر در توسعه پایدار یک منطقه، فراهم آوردن منابع آب مناسب از نظر کمی و کیفی می­باشد. در این مطالعه مدل­های شبکه عصبی مصنوعی، رگرسیون خطی چند متغیره  و ترکیب شبکه عصبی- موجک برای پیش بینی غلظت سولفات و کلراید در ایستگاه بامدژ رودخانه دز بررسی شد و تأثیر پیش­پردازش داده­ها روی عملکرد مدل­ها به­وسیله تجزیه موجک مورد تحقیق قرار گرفت. بدین منظور سری­های زمانی دبی، سولفات و کلراید مشاهده شده­ رودخانه، در سطوح مختلفی به زیرسری­ها تجزیه شدند. سپس حاصل جمع جبری زیرسری­های مؤثر دبی، سولفات و کلراید به عنوان ورودی مدل شبکه عصبی برای پیش­بینی یک ماه بعدی سولفات و کلراید درنظر گرفته شد. نتایج نشان داد که عملکرد پیش­بینی مدل ترکیبی موجک نسبت به شبکه عصبی و رگرسیون بهتر می باشد. هم­چنین مدل ترکیبی موجک عصبی برای مقادیر بیشینه، پیش­بینی قابل قبولی را ارائه داد. این مدل، میانگین حداقل خطا را برای مدل­های رگرسیون و شبکه عصبی در مدل­سازی کلراید، به ترتیب از 84/0 و 64/0 به 52/0 و در مدل­سازی سولفات به ترتیب از 7/1 و 95/0 به 63/0 کاهش داد. هم­چنین این مدل توانست پدیده هیسترزیس را برای مدل سولفات به خوبی شبیه­سازی کند، درحالی که مدل رگرسیون در تشخیص آن ناتوان بود.}, keywords_fa = {تبدیل موجک,رودخانه دز,سولفات,شبکه عصبی,کلراید}, url = {https://idj.iaid.ir/article_55657.html}, eprint = {https://idj.iaid.ir/article_55657_ba791699f2228744318f3ee1207eaba9.pdf} } @article { author = {Sharifan, Hossein and Pazhoohesh, Faeghe and Dehghani, Amir Ahmad}, title = {Forecasting Low and High Monthly Discharge Using a Stochastic Model and Artificial Intelligence}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {510-518}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {   Forecasting the low and high flow of rivers is really important, especially in areas where surface water resources are considered as the main source of drinking and agricultural purposes. In this paper, the monthly low and high flow time series  of Gorganrud river have been modeled and forecasted using a stochastic model(ARIMA) and Artificial Intelligence (ANN). For monthly Low and high flow, the moving average value of one, three, five and seven daily flow was considered. At the end, the low flow series had better result in Stochastic model and neural network. According to the mean absolute error (MAE), in 1 and 7 daily low flow series, Stochastic model, SARIMA, had better results, and in 3 and 5 daily low flow series, the artificial intelegence, ANN, show better results. In high flow series, in 1 daily time series, Stochastic model(SARIMA), and in 3, 5  and 7 daily time series, ANN were appropriate.}, keywords = {Monthly low-flow,Monthly high flow,Time series models,ARIMA,Artificial Neural Network(ANN)}, title_fa = {پیش‌بینی مقدار آبدهی رودخانه در شرایط کم‌آبی و پرآبی با استفاده از یک مدل استوکستیک و هوش مصنوعی}, abstract_fa = {با توجه به برنامه­ریزی منابع آب، به­خصوص در مناطقی که منابع آب سطحی به عنوان اصلی­ترین منبع در امور شرب و کشاورزی به­حساب می­آیند، برآورد میزان آب رودخانه­ها در دوره­های کم آبی و پرآبی اهمیت پیدا می­کند. در این تحقیق با استفاده از یک مدل­سازی سری زمانی، میزان و زمان وقوع کم­آبی و پرآبی رودخانه گرگانرود، بر اساس مدل سری زمانی متداول میانگین متحرک تجمعی خود بازگشت(ARIMA) برآورد شده است و در ادامه از شبکه عصبی، به­عنوان مدلی از خانواده هوش مصنوعی، در برآورد میزان و زمان وقوع کم­آبی و پرآبی رودخانه، استفاده شده است. مقدار کم­آبی و پرآبی هر ماه، با استفاده از مقدار میانگین متحرک یک، سه، پنج و هفت روزه­ی دبی جریان در هر ماه، در نظر گرفته شده است. در پایان، این نتیجه حاصل شد که سری­های­زمانی کم­آبی، نسبت به سری­زمانی پرآبی، در استفاده از مدل استوکستیک و شبکه عصبی نتایج بهتری ارائه می­دهند، هم­چنین با توجه به آماره میانگین خطای مطلق(MAE) و در سری­زمانی کم­آبی1و7 روزه، مدل استوکستیکARIMA ، نسبت به مدل شبکه عصبی نتیجه بهتری ارائه می­دهد، شبکه عصبی نیز در سری­زمانی کم­آبی، 3و5 روزه، نتایج بهتری را ارائه می­دهد و با توجه به آماره میانگین خطای مطلق(MAE) در پرآبی­ها، مدل  ARIMAدر سری زمانی یک روزه و ANN در سری زمانی 3 و 5 و 7 روزه نتایج مناسب­تری ارائه داده است.}, keywords_fa = {آبدهی ماهانه,کم‌آبی,پرآبی,مدل‌سازی سری زمانی,ARIMA,شبکه عصبی}, url = {https://idj.iaid.ir/article_55658.html}, eprint = {https://idj.iaid.ir/article_55658_a912d9a2e68f2a40b24df290d29dc913.pdf} } @article { author = {Farzankia, Fourough and Maroufpoor, Eisa and Rostamyan, Bahareh and Azarboo, Nasabeyeh}, title = {Investigation of Water Distribution Uniformity of Some Impact Sprinklers in the Fixed Head Sprinkle Irrigation System in Different Hydraulic Conditions and Atmospheric}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {519-527}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Investigation of sprinklers Hydraulic performance is very effective for improving of sprinkle irrigation systems efficiency. In this study investigation of effective factors for water distribution uniformity of three sprinklers of ZM22, ZK30 and AMBO were studied in different hydraulic and atmospheric conditions in summer and autumn of 1390. Experiments of this study in the research field of University of Kurdistan were performed using a single sprinkler method according with ISO 7749-1 and ISIRI 8995-3 standards. Effect of parameters of wind velocity (0-1.8 calm, 1.8-4.5 middle m/s), sprinkler operating pressure (3, 3.5, 4 and 4.5 bar) and layouts of square, rectangular and triangular with sprinkler space, 22, 26 and 30 meter for ZM22 and AMBO sprinklers and 18, 21 and 24 for ZK30 sprinkler was investigated on water distribution uniformity. The results showed  that the two rang of  calm and middle wind velocity effect was the same on the water distribution uniformity in all three sprinklers. The effect of pressure for water distribution uniformity was significant on 1% level for ZK30 and AMBO sprinklers and the effect of pressure for ZM22 sprinkler just in the middle wind velocity was significant on 5% level.Thepressure in4.5 barhad thehighest ofuniformity coefficient. The effect of two parameters of sprinklers space and layout were significant on 1% level in all three sprinklers. The triangularlayout had maximum uniformity coefficient for each sprinkler.}, keywords = {sprinkler operating pressure,sprinklers space and layout,uniformity coefficient,wind velocity,hydraulic performance}, title_fa = {بررسی یکنواختی توزیع آب برخی آبپاش‌های ضربه‌ای در سیستم آبیاری بارانی کلاسیک ثابت در شرایط‌ مختلف جوی و هیدرولیکی}, abstract_fa = {بررسی عملکرد هیدرولیکی آبپاش‌ها در بهبود راندمان سیستم‌های آبیاری بارانی بسیار مؤثر می‌باشد. در این تحقیق به بررسی عوامل مؤثر بر میزان یکنواختی توزیع آب سه آبپاش ZK30، AMBOو ZM22 در شرایط مختلف هیدرولیکی و جوی تابستان و پاییز سال1390 پرداخته شد. آزمایش‌ها در مزرعه تحقیقاتی دانشگاه کردستان مطابق با استانداردهای، 7749-1ISOو ISIRI 8995-3به روش آبپاش منفرد انجام شد. اثر تیمارهای سرعت باد (8/1-0 آرام، 5/4-8/1 متوسط)، فشارکارکرد آبپاش (3، 5/3، 4 و 5/4 بار) و آرایش مربعی، مستطیلی و مثلثی با فواصل آبپاش 22، 26 و 30 متر برای دو آبپاش ZM22 و AMBOو 18، 21 و 24 برای آبپاش ZK30بر میزان یکنواختی توزیع آب بررسی شد. نتایج نشان دادند که اثر دو بازه‌ی سرعت باد آرام و متوسط بر میزان یکنواختی توزیع آب در هر سه آبپاش یکسان است.اثر فشار بر میزان یکنواختی در سطح احتمال 1 درصد در دو آبپاشZK30و AMBOمعنی‌دار شد و در آبپاش ZM22فقط در باد متوسط اثر فشار بر یکنواختی در سطح احتمال 5% معنی‌دار شد. در هر سه آبپاش مورد ارزیابی فشار 5/4 بار بیش­ترین یکنواختی را داشت. اثر دو پارامتر فاصله آبپاش و آرایش بر میزان یکنواختی در هر سه آبپاش در سطح احتمال 1 درصد معنی‌دار شد. آرایش مثلثی برای هر سه آبپاش بالاترین ضریب یکنواختیرا داشت. }, keywords_fa = {سرعت باد,ضریب یکنواختی,عملکرد هیدرولیکی,فشار کارکرد آبپاش,فواصل و آرایش آبپاش‌ها}, url = {https://idj.iaid.ir/article_55659.html}, eprint = {https://idj.iaid.ir/article_55659_70bad8d998813bc64de26e1886594b08.pdf} } @article { author = {Mahdavi, Atefeh and Zare abyaneh, Hamid}, title = {Selection of the Most Suitable Method for Estimation and Interpolation of Potential Evapotranspiration in Isfahan Province}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {528-539}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {The Potential Evapotranspiration (ETp) is one of the important elements in hydrologic cycle, which is required to be estimated in many fields such as irrigation projects, hydraulic structures, drainage and hydrological studies. This element represents the potential losses from the moist soil layer and the vegetation cover. Therefore, calculation and estimation of this parameter is important. In other hand, the standard interpolation methods are used for achieving evapotranspiration phenomena in points where does not have measured meteorological parameters. In Ref-ET software, the twelve methods were compared with tow lysimeter data based on RMSE, MBE and r statistical criteria in order to adopt an accurate method(s) of estimation of potential evapotranspiration for reference crop in Isfahan. The results showed that the Penman 1948 and the Kimberly- Penman 1996 methods give better estimations. Then the 10 synoptic station were selected in study area and ETp was calculated in every station in a period (1992- 2005) using Penman 1948 method. In Surfure 8.02, eight interpolation techniques were considered and the estimations of these methods were evaluated by Cross-Validation method based on RMSE index. The results indicated the Minimum curvature, the Polynomial Regression and the Kriging techniques are the most suitable ones. Finally, iso ETp maps were plotted based on Penman 1948 method and Minimum curvature technique in Isfahan province.}, keywords = {Potential Evapotranspiration,Lysimeter,interpolation and Cross Validation}, title_fa = {انتخاب مناسب‌ترین روش برآورد تبخیر و تعرق مرجع و پهنه‌بندی آن در استان اصفهان}, abstract_fa = {تبخیر و تعرق پتانسیل یکی از عوامل مهم سیکل هیدرولوژیکی است که باید در طرح‌های آبیاری، تأسیسات آبی، مطالعات زهکشی و هیدرولوژیکی برآورد شود. این عامل بیانگر میزان تلفات بالقوه از سطح خاک مرطوب و پوشش گیاهی بوده و از این‌رو محاسبه و برآورد آن حائز اهمیت می‌باشد. از سوی دیگر یکی از راه‌های تخمین این پارامتر در نقاط فاقد ایستگاه، استفاده از روش‌های میان‌یابی است که اگر به درستی انتخاب شوند، بر دقت و صحت این پارامتر می‌افزاید. در این تحقیق به منظور تعیین مناسب‌ترین روش تخمین تبخیر و تعرق پتانسیل گیاه مرجع چمن در استان اصفهان، 12 روش موجود در نرم‌افزار Ref-ET با دو سری داده لایسیمتری بر اساس معیارهای RMSE، MBE و r مقایسه شدند. نتایج نشان داد که روش‌های پنمن 1948 و  کیمبرلی- پنمن 1996 مناسب‌ترین معادلات بودند. سپس 10 ایستگاه سینوپتیک در منطقه مورد مطالعه انتخاب شدند و  مقادیر تبخیر و تعرق پتانسیل در هر ایستگاه در یک دوره آماری 14 ساله (1992- 2005) با استفاده از روش پنمن 1948 محاسبه شد. به منظور انتخاب بهترین روش میان‌یابی، 8 روش موجود در نرم‌افزار Surfure8.02 انتخاب و به روش اعتبارسنجی متقابل مقدار RMSE هر روش محاسبه گشت و مشخص شد که مدل‌های انحنای کمینه، رگرسیون چند جمله‌ای و کریجینگ کروی مناسب‌ترین روش‌های میان‌یابی در منطقه مورد مطالعه می‌باشند. در نهایت نقشه‌های پهنه‌بندی تبخیر و تعرق پتانسیل بر اساس روش پنمن 1948 و مدل انحنای کمینه، در استان اصفهان ترسیم شدند.}, keywords_fa = {تبخیر وتعرق پتانسیل,لایسیمتر,میان‌یابی,اعتبارسنجی متقابل}, url = {https://idj.iaid.ir/article_55660.html}, eprint = {https://idj.iaid.ir/article_55660_b948a2bcbd178323e0d445ea6432181b.pdf} } @article { author = {Nabiafjadi, Samira and Shabanali Fami, Hossein and Rezvanfar, Ahmad}, title = {Farmers ' Attitude Toward Agricultural Water Management Problems in Falavarjan Area}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {540-548}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {The main purpose of this study is to investigating farmers ' attitude toward agricultural water management problems in Falavarjan area. This study is a sort of survey studies and a questionnaire is used for collection of data and information. Questionnaire's reliability is confirmed through computing Alpha coefficient which is more than 0.70. Face validity of questionnaire is confirmed by a panel of expert judgment. Statistical population of this study is consisted of 20156 farmers; out of which 205 people are selected as sample using multi-stage sampling technique. Correlation analysis findings revealed that there are significant relationships and positive among farmers ' attitude toward agricultural water management problems and other variables such as "used of information resources", "contacts of extension agents", "attitude of impacted of irrigation systems" and " farmers' knowledge of agricultural water management technologies", "application of agricultural water management technologies" and "measurement of farm lands".}, keywords = {problems,Management,Attitude,Falavarjan}, title_fa = {بررسی مشکلات مدیریت آب کشاورزی از دیدگاه زارعین شهرستان فلاورجان}, abstract_fa = {هدف از این تحقیق، بررسی مسائل و مشکلات مدیریت آب کشاورزی از دیدگاه کشاورزان در شهرستان فلاورجان واقع در استان اصفهان است. روش تحقیق این مقاله از نوع پیمایشی می‌باشد، برای جمع‌آوری اطلاعات از ابزار پرسشنامه استفاده گردید و پایایی مقیاس اصلی آن از طریق آلفای کرونباخ مورد تأیید قرار گرفت(7/0<). هم­چنین اعتبار پرسشنامه نیز توسط اساتید و کارشناسان مدیریت جهاد کشاورزی شهرستان فلاورجان مورد تأیید قرار گرفت. جامعه آماری این تحقیق را کشاورزان شهرستان فلاورجان تشکیل می‌دهد(20156 نفر )، که با استفاده از روش نمونه‌گیری طبقه‌ای- تصادفی، حجم نمونه به تعداد 205 نفر، انتخاب گردید. نتایج حاصل از همبستگی نشان داد که بین مهم­ترین مشکلات مدیریت آب کشاورزی از دیدگاه کشاورزان با متغیرهای استفاده از منابع اطلاعاتی، میزان دسترسی به آب، متوسط فاصله منبع آب تا مزرعه، میزان دانش کشاورزان نسبت به فناوری‌های نوین مدیریت آب، میزان به­کارگیری فناوری‌های مدیریت آب توسط کشاورزان، نگرش کشاورزان نسبت به آبیاری تحت فشار، تعداد قطعات اراضی، سابقه کشاورزی و مساحت کل اراضی رابطه معنی‌داری وجود دارد.}, keywords_fa = {مشکلات,مدیریت,دیدگاه,فلاورجان}, url = {https://idj.iaid.ir/article_55661.html}, eprint = {https://idj.iaid.ir/article_55661_8dca9916780760a648358c3adf24134b.pdf} } @article { author = {Beykzadeh, Elham and Ziaei, Ali Naghi and Davari, Kamran and Ansari, Hossein}, title = {Finding the Optimum Infiltration and Roughness Parameters in Furrow Irrigation Using Complete Hydrodynamic Model}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {549-555}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Infiltration and roughness coefficients have significant effect on infiltration and  furrow irrigation simulation. The variability of these coefficients and also wetted perimeter during irrigation and among different irrigations can lead to inaccurate modeling results. Therefore, in this study, the infiltration parameters and roughness coefficient were first estimated using two point method and multilevel calibration method with a complete hydrodynamic model. The effect of scaling method was then evaluated. Two sets of field data, walker and Printz were utilized for the verification of the results. RMSE values for advance phase were reduced from 5/76 to 3/72 for Prints irrigation data with two point method and increased for recession phase from 2/72 to 2/75. This method caused the recession simulation error to increase from 5/99 to 26/98 and the advance error to reduce from 15/18 to 13/23 for walker irrigation data. The scaling method had the similar results to two point method. However, the advance and recession error in both Walker  and Printz irrigations were reduced using the multilevel calibration method.}, keywords = {multilevel calibration,two point method,scaling method,Saint-Venant equation}, title_fa = {تعیین ضرایب نفوذ و زبری بهینه در آبیاری جویچه‌ای با استفاده از مدل هیدرودینامیک کامل}, abstract_fa = {پارامترهای نفوذ و زبری تأثیر قابل توجهی بر میزان نفوذ و هم­چنین شبیه­سازی آبیاری جویچه­ای دارند. علاوه بر آن تغییرپذیری این ضرایب در طول آبیاری و در زمان­های متفاوت بر اساس تفاوت در محیط خیس­شده، موجب تغییر در میزان نفوذ و در نهایت مدل­سازی عددی نامطلوب می­گردد. به همین منظور در این تحقیق ابتدا با استفاده از روش­های دونقطه­ای و واسنجی چند مرحله‌ای، ضرایب نفوذ و زبری بهینه توسط یک مدل هیدرودینامیک کامل برآورد گردید، سپس به بررسی یک روش مقیاس برای کنترل‌های زمان واقعی پرداخته شد. برای ارزیابی نتایج حاصل از مدل، از داده­های مزرعه­ای واکر و پرینتز استفاده شد. روش دونقطه‌ای در آبیاری پرینتز مقدار RMSE را در فاز پیشروی از 76/5 به 72/3 کاهش و در فاز پسروی از مقدار 72/2 به 75/2 افزایش داده است. در آبیاری واکر نیز موجب افزایش خطا از 99/5 به 98/26 در فاز پیشروی و کاهش خطا از 18/15 به 23/13 در فاز پسروی گردید. روش مقیاس نیز عملکرد مشابهی با روش دونقطه‌ای نشان داد. در صورتی‌که روش واسنجی در آبیاری­های واکر و پرینتز در هر دو فاز پیشروی و پسروی نسبت به روش دونقطه­ای و روش مقیاس بهتر عمل کرده و موجب کاهش خطای شبیه‌سازی گردید. }, keywords_fa = {واسنجی چند مرحله‌ای,روش دونقطه‌ای,روش مقیاس,معادله سنت ونانت}, url = {https://idj.iaid.ir/article_55662.html}, eprint = {https://idj.iaid.ir/article_55662_7475abdbf2d2e55c2b17366a1dc6d399.pdf} } @article { author = {Abareshi, Farzaneh and Meftah Halghi, Mehdi and Rahimian, Mehdi}, title = {Determination of Effective Factors on Drinking Wealhead Protection Area by Using Simulational Groundwater Model (Case Study: Zarringol plain)}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {556-568}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Delineation of the wellhead protection area for drinking water wells is an effective method to manage and protect water supply resources and it is important in public health. Therefore, this study aimed to determine the wellhead protection area to avoid contamination of drinking water wells, by drawing an area around wells that should be prevented the development and creation of any pollution in this area using a mathematical model. In order to drawing the wellhead protection area of 46 drinking water wells in Zarringol plain in Golestan province GMS7.1 software was used. For this purpose after providing conceptual model to determine the hydrodynamic coefficients of aquifer, the model has been run in steady-state and unsteady-state, and then it has been calibrated for one month in steady state and afterward for 5 years with seasonal stress in un-steady state. After ensuring the accuracy of the model, to determine the wellhead protection area for drinking water wells, the MODPATH particle locating was used. After providing wellhead protection area for1, 2, 3 and 5 years of the wells, the effect of various parameters on the form and how to extend wellhead protection area was discussed and evaluated. Based on the results of the study, determining the groundwater flow direction and hydraulic gradient are the most influential factors in the safety and privacy of a well since increasing hydraulic gradient causes narrowing and stretching of safety zone of well. The rate of pumping also is the other factor which could be effect, by increasing pumping rate the wide of safety zone of well will be increased, however it has no effect on the long of safety zone. The other parameters such as hydraulic conductivity and specific yield are next order of importance.}, keywords = {Wellhead protection area,Pollution,Zarringol plain,MODPATH}, title_fa = {تعیین حریم حفاظتی چاه‌های آب شرب با استفاده از مدل شبیه‌ساز آب زیرزمینی (مطالعه موردی: دشت زرین‌گل)}, abstract_fa = {تعیین حریم حفاظتی چاه­های شرب روشی مؤثر جهت حفاظت و مدیریت منابع تأمین­کننده آب می­باشد و اهمیت به­سزایی در سلامت و بهداشت عمومی دارد. لذا این پژوهش با هدف تعیین محدوده حفاظتی جهت جلوگیری و پیشگیری از آلودگی چاه­های آب شرب، به وسیله ترسیم یک محدوده در اطراف چاه با استفاده از مدل ریاضی و ممانعت از توسعه و ایجاد منابع آلودگی در داخل این محدوده صورت پذیرفته است. از این­رو به­منظور ترسیم حریم حفاظتی 46 حلقه چاه­ شرب موجود در دشت زرین­گل در استان گلستان از نرم­افزار GMS7.1 استفاده شد. برای این منظور پس از تهیه مدل مفهومی منطقه مطالعاتی، با هدف تعیین ضرایب هیدرودینامیکی آبخوان، مدل­سازی در دو حالت ماندگار و غیرماندگار انجام شد. در حالت ماندگار کالیبراسیون در یک دوره یک ماهه و در حالت غیرماندگار به مدت 5 سال با تنش­های فصلی انجام شد. پس از اطمینان از صحت مدل تهیه شده، به­منظور تعیین حریم حفاظتی چاه­های آب شرب از برنامه مکان­یابی ذره­ای MODPATH استفاده گردید. پس از تهیه حریم­های حفاظتی با زمان­های سیر 1، 2، 3 و 5 ساله برای چاه­های فوق­الذکر، تأثیر پارامترهای مختلف بر روی شکل و چگونگی گسترش حریم حفاظتی، مورد بحث و بررسی قرار گرفت. براساس نتایج حاصل از تحقیق معلوم گردید که مؤثرترین عامل در تعیین شکل و حریم حفاظتی یک چاه، جهت جریان و گرادیان هیدرولیکی می­باشد. به­طوری­که، افزایش گرادیان هیدرولیکی سبب نازکی و کشیدگی حریم حفاظتی می‌گردد. میزان دبی پمپاژ نیز از دیگر عوامل مؤثر بر حریم حفاظتی می­باشد. به­گونه‌ای که با افزایش میزان برداشت از چاه، عرض حریم حفاظتی افزایش یافته و تأثیر چندانی در طول حریم ندارد. پارامترهای دیگر از قبیل هدایت هیدرولیکی آبخوان، میزان برداشت و... در مراتب بعدی قرار می­گیرند.}, keywords_fa = {حریم حفاظتی چاه,آلودگی,دشت زرین‌گل,MODPATH}, url = {https://idj.iaid.ir/article_55664.html}, eprint = {} } @article { author = {Heydari, Mohammad Mehdi and Shafai-Bajestan, Mahmoud}, title = {Experimental Investigation of the Effect of Baffle on the Improvement Efficiency of Sedimentation Tanks}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {569-580}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Settling basins are essential hydraulic structures which have to be designed and constructed at all river water intakes to remove most of suspended sediments which enters the intake by flowing water. The bigger the basin, the best the retardation of the sediments, but the expenses and Dredging are higher too. Therefore, improvement of performance and increasing sediment removal efficiency of settling basins by alternative method is necessary. A common approach for increasing settling tanks performance is to use baffles. Most previous studies have been conducted in primary and secondary tanks. Thus, in present work, the investigations on the baffle effects on the settling efficiency are performed have by experiments. To do so extensive experimental tests were conducted in a flume of 8.0 × 0.3× 0.5 m and 3m length of basin using three different sediment concentrations under three Froude numbers. The baffle installed at the bottom of the basin and the effects of angle position, height and location on Trap efficiency were investigated. The results indicate that, the baffle increased sediment removal efficiency about 5-6 percent and the best of angle baffle with flow is obtained 60º. Also, the best height and location of a single baffle are 40% of the flow depth and at the 50% of the basin length from the inlet, respectively.}, keywords = {Settling Basin,Trap efficiency,Baffle,Suspended Sediment}, title_fa = {بررسی آزمایشگاهی تأثیر صفحات آرام کننده جریان بر بهبود راندمان رسوبگذاری حوضچه-های رسوب‌گیر آبیاری}, abstract_fa = {حوضچه­های رسوب­گیر از جمله سازه­های ضروری است که به­منظور جدا کردن رسوبات معلق همراه جریان ورودی در ابتدای آبگیرهای منشعب از رودخانه­ها و کانال­های آبیاری احداث می­شوند. هر چه حوضچه رسوب­گیر بزرگ­تر ساخته شود، عمل رسوب­گیری بهتر انجام گرفته ولی هزینه ساخت و لایروبی آن بیش­تر می شود. با توجه به این موارد، بهبود عملکرد و افزایش راندمان رسوب گذاری با روش­های جایگزین به­نظر ضروری می­رسد. یکی از این روش­های مؤثر، استفاده از صفحات آرام­کننده جریان (بفل) است. عمده مطالعات قبلی انجام شده در این زمینه، استفاده از صفحات در حوضچه­های رسوب­گیر اولیه و ثانویه بوده است. از این رو، این مطالعه با هدف افزایش راندمان تله­اندازی در حوضچه­های رسوب­گیر آبیاری با استفاده از صفحات انجام شده است. برای رسیدن به این هدف در فلومی به ابعاد 8 متر طول ، عرض 30/0 و ارتفاع 50/0 متر با در نظر گرفتن حوضچه رسوب­گیر به طول 3 متر ، در سه غلظت متفاوت ورودی ، سه دبی و سه عدد فرود مختلف آزمایشات انجام شد. صفحات در کف حوضچه تعبیه و تأثیر زاویه، ارتفاع و موقعیت آن در حوضچه مورد بررسی قرار گرفت. نتایج نشان داد که کاربرد صفحات کفی به­طور متوسط 5 تا 6 درصد راندمان رسوب­گذاری را افزایش داده و بیش­ترین میزان مربوط به زاویه 60 درجه نسبت به جهت جریان به­دست آمد. طبق نتایج تحقیق حاضر، مناسب­ترین ارتفاع و موقعیت این صفحات به­ترتیب 40 درصد عمق جریان و 50 درصد طول حوضچه رسوب­گیر حاصل شد و هم­چنین با افزایش تعداد صفحات راندمان رسوب­گذاری کاهش یافت. در مورد مناطق رسوب­گذاری نیز در این حالت بیش از 80 درصد رسوبات نهشته شده در میانه حوضچه از ورودی مشاهده می­گردد. }, keywords_fa = {حوضچه رسوبگیر,تله اندازی,صفحات,رسوبات معلق}, url = {https://idj.iaid.ir/article_55704.html}, eprint = {https://idj.iaid.ir/article_55704_bae100e8f0a2442c083fe8b53bc95e48.pdf} } @article { author = {Jamali, Sara and Monem, Mohammad Javad}, title = {PID Controller Tuning Using Genetic Algorithms to Control the Water Level}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {581-590}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Importance of water delivery and distribution leads to use more accurate systems for water monitoring and controlling. The proportional–integral–derivative (PID) control system is one of the most prevalent control systems that its successful design and implementation depend on control coefficients tuning rules. In this study, Genetic Algorithm has been used to optimize the coefficients of the PID control to control water level; so its model has developed and linked with ICSS Hydrodynamic model. The optimization process was applied on the pivot gate in ASCE test case 2. The objective function of the GA consists of three performance indexes of MAE, IAE and dimensionless form of SRT. The results of optimized coefficients were compared with the trial and error coefficients in study which was alike in canal, structure and operation scenario. The results show that all of the indexes have been improved generally and Genetic Algorithm functioned properly in PID tuning.}, keywords = {PID Controller,Pivot weir,Evaluation indexes,Genetic algorithm,irrigation canal,ICSS model}, title_fa = {تنظیم کنترلگر PID با استفاده از الگوریتم ژنتیک برای کنترل تراز آب}, abstract_fa = {اهمیت تحویل و توزیع آب در شبکه­های آبیاری منجر به استفاده از سیستم­های دقیق­تری در نظارت و کنترل آب شده است. یکی از متداولترین سیستم­های کنترل خودکار، سیستم تناسبی – تجمعی- تفاضلی (PID) است که طراحی واجرای موفق این کنترل­کننده به تنظیم ضرایب کنترلی آن وابسته است. در این تحقیق از الگوریتم ژنتیک در بهینه­یابی ضرایب این کنترل­گر برای کنترل تراز آب استفاده شده است، برای این منظور مدل مربوط به آن تهیه و با مدل هیدرودینامیک ICSS تلفیق گردید. روند بهینه­سازی این ضرایب برای سیستم کنترل خودکار سرریز لولایی در کانال شماره دو ASCE مورد آزمون قرار گرفت، تابع هدف الگوریتم ژنتیک در این تحقیق، متشکل از شاخص­های ارزیابی MAE ، IAE و فرم بی­بعد SRT بوده است. نتایج حاصله از ضرایب بهینه به­دست آمده با ضرایب حاصله از آزمون و خطا در تحقیق مشابه در کانال، سازه و گزینه بهره­برداری، مورد مقایسه قرار گرفت. نتایج نشان داد کلیه شاخص­ها در ضرایب بهینه شده بهبود یافته­اند و الگوریتم ژنتیک در تنظیم کنترل­گرPID  مناسب عمل کرده است. }, keywords_fa = {کنترل‌گر PID,سرریز لولایی,شاخص‌های ارزیابی,الگوریتم ژنتیک,کانال آبیاری,مدل ICSS}, url = {https://idj.iaid.ir/article_55705.html}, eprint = {https://idj.iaid.ir/article_55705_fecd9533a14cbb864ac880e8b6d7b3cc.pdf} } @article { author = {Rezaei, Mojtaba and Raeini Sarjaz, Mahmoud and Shahnazari, Ali and Vazifedoust, Majid}, title = {Estimation of paddy field rice yield in the Sephidrud system using Landsat images (case study : Some Sara)}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {591-601}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Early and precise estimation of rice production is a nationwide need in order to early import forecasting. The present study was carried out in the Sephidrod irrigation network of Iran to assess feasibility and accuracy of using remote sensing imagary in predicting regional rice yield. Four Landsat 5 and 7 images were acquired and processed, then NDVI, SAVI and LAI indices were calculated. For the second step a simple linear equation was fitted between these indices and rice biomass (BM), yield (Yld) and straw (St) measured in 110 paddy fields of common farmers. The results showed the best correlation between NDVI and BM achieved from Landsat5 in flowering stage of rice (R2=0.59, RMSE= 1030 kgha-1, NRMSE= 12%), For yield and St RMSE and NRMSE were : 12%, 434 and 15%, 711  kg.ha-1 . In term of using LAI the best correlation coefficient for BM, Yld and St were 0.6, 051 and 0.54. The observed inaccuracy were 919, 380 and 706  kg.ha-1 . A better correlation was observed between measured traits and SAVI comparing with NDVI and LAI. The correlation coefficient for Bm, Yld and St were 0.69, 0.58 and 0.53 with inaccuracy of 10%, 10% and 14% . RMSE for SAVI were 870, 375 and 680 kg.ha-1 for Bm, Yld and St, respectively. The result showed that remote sensing could estimate rice yield at flowering stage, at least 30 days before harvesting.}, keywords = {NDVI,Paddy,Remote Sensing,Yield,Etm+}, title_fa = {برآورد عملکرد برنج در بخشی از شبکه سفیدرود گیلان با استفاده از تصاویر ماهواره لندست ( مطالعه موردی: صومعه سرا)}, abstract_fa = {برآورد زود هنگام عملکرد برنج نقش مهمی در مدیریت مواد غذایی کشور دارد. پژوهش حاضر برای بررسی امکان برآورد عملکرد برنج در شهرستان صومعه­سرای استان گیلان با استفاده از چهار تصویر ماهواره لندست پنج و هفت انجام شده است. شاخص­های NDVI، SAVI و  LAIاز­ تصاویر استخراج و رابطه آن­ها با صفات عملکرد، زیست­توده و کاه اندازه­گیری شده از80 مزرعه کشاورزان محلی به دست آمد. نتایج نشان داد بالاترین ضریب­ تبیین برای برآورد زیست­توده با شاخصNDVI مربوط به تصویر ماهواره لندست پنج در دوره گلدهی (59/0= R2) با خطای اندازه­گیری 12­درصد، معادل 1030 کیلوگرم در هکتار می­باشد. خطای اندازه­گیری برای عملکرد شلتوک و کاه تولیدی به ترتیب 12و 15 درصد معادل 434 و 711 کیلوگرم­ در هکتار بود. بالاترین ضریب تبیین رابطه میان LAI و مقدار زیست­توده، عملکرد و کاه تولیدی مربوط به­همین تصویر به­ترتیب معادل 60/0، 51/0 و 54/0 می­باشد. خطای برآورد 919، 380 و 706 کیلوگرم در هکتار بود. شاخص SAVI در مقایسه با NDVI و LAI بالاترین دقت را داشته است. مقدار ضرایب تبیین برای زیست­توده، عملکرد و کاه به­ ترتیب برابر 69/0، 58/0و 63/0 و خطا 10، 10 و 14 درصد معادل 870، 375 و 680 کیلوگرم در هکتار بوده است. که منجر به نتایج دقیق­تری برای برآورد مقدار زیست­توده عملکرد و کاه تولیدی برنج در سطح وسیع شده است. نتایج نشان داد فناوری سنجش از دور توانایی برآورد عملکرد برنج را یک ماه قبل از برداشت برنج با دقت مناسبی دارد. }, keywords_fa = {سنجش از دور,شالیزار,شاخص گیاهی بهنجارشده,Etm+}, url = {https://idj.iaid.ir/article_55706.html}, eprint = {https://idj.iaid.ir/article_55706_0f4413a146c7c1abdd024405b02d18e1.pdf} } @article { author = {Majidi, Meysam and Alizadeh, Amin and FaridHosseini, Ali Reza and Vazifedoust, Majid}, title = {Lake and Reservoir Evaporation: Energy Balance Estimations, Evaluation of Combination and Radiation− Temperature Methods}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {602-615}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Reservoir operations and development of new storage and water accounting strategies require more accurate evaporation estimates especially for Doosti dam reservoir as most important drinking water resource of Mashhad in arid conditions. In this study an attempt has been made to estimate evaporation from Doosti dam reservoir using combination and radiation−temperature methods based on energy balance method. For this reason, 10 evaporation estimation methods in some categories as energy balance, pan, radiation− temperature and combination group have been used. According to limited data especially for energy balance method, the field measurements of the dam were conducted for one year.The lake energy balance yields annual evaporation of 69.9 mcm. Annual evaporation estimations resulted from other methods ranged between 39 to 99 mcm. According to the assessments, evaporation values from Jensen−Haise, Makkink, Penman and deBruin methods compared most favorably with energy balance method determined values. Methods that rely only on measurement of air temperature, or air temperature and sunshine data (Jensen−Haise and Makkink), because of their simplicity, least sensitivity and high accuracy, were relatively cost−effective options for measuring evaporation at this reservoir, outperforming some methods that require measurement of a greater number of variables. }, keywords = {: Combination methods,Doosti dam reservoir,Energy balance,Lake evaporation,Radiation -temperature}, title_fa = {تبخیر از دریاچه‌ها و مخازن سدها: برآوردهای بیلان انرژی، ارزیابی روش‌های تابش دما و روابط ترکیبی}, abstract_fa = {برنامه‌ریزی، مدیریت و بهره‌برداری از ذخایر سدها به‌ویژه در مناطق خشک و نیمه خشک نیاز به برآوردهای مطمئن از تبخیر دارد. این وضعیت در شرایطی مانند سد دوستی که منبع استراتژیک تأمین بخش وسیعی از آب شرب مشهد نیز می‌باشد، اهمیتی دوچندان می‌یابد. در این تحقیق تلاش شده است با استفاده از بیلان انرژی دریاچه سد دوستی، میزان تبخیر برآورد گردیده و در عین حال برخی روش‌های دمایی و ترکیبی، مورد ارزیابی قرار گیرند. به این منظور 10 روش معتبر برآورد تبخیر در قالب گروه‌هایی مبتنی بر بیلان انرژی، تشت، تابش ـ دما و روش‌های ترکیبی مورد استفاده قرار گرفت. با توجه به کمبود داده‌های مورد نیاز، به‌ویژه برای بیلان انرژی و برخی روش‌های منتخب، اندازه‌گیری‌های میدانی از دریاچه سد دوستی برای دوره زمانی یک‌ساله،انجام گردید. نتایج بیلان انرژی به عنوان روش استاندارد، میزان تبخیر سالانه را درحدود 9/69 میلیون مترمکعب از دریاچه سد دوستی برآورد نمود. سایر روش‌ها مقدار تبخیر سالانه رادر حدود 39 تا 99 میلیون مترمکعب برآورد نموده‌اند. نتایج ارزیابی شدت تبخیر حاصل از روش‌های مورد استفاده در مقیاس زمانی روزانه و ماهانه، حاکی از ضعف برخی معادلات ترکیبی و نیز داده‌های مربوط به تشت می‌باشد. از طرفی حصول نتایج نسبتاً دقیق از روش‌هایی که صرفاً تکیه بر داده‌های دمایی و یا تابشی (جنسن ـ هیز و مککینک) دارند از نتایج قابل توجه این تحقیق است؛ دقت این روش‌ها با توجه به کمبود شدید داده‌های مورد نیاز، قابل اعتماد و در دسترس در اغلب دریاچه‌ها و مخازن سدها می‌تواند در بهبود برنامه‌ریزی‌ها و مدیریت این سامانه‌های آبی، راه‌حلی نوید بخش باشد.  }, keywords_fa = {بیلان انرژی,روش‌های ترکیبی,روش‌های تابش ـ دما,سد دوستی}, url = {https://idj.iaid.ir/article_55707.html}, eprint = {https://idj.iaid.ir/article_55707_b73f53516bc382244767267eb41e6b65.pdf} } @article { author = {Asadi, Arash and Babazadeh, Hossein and Ghajarnia, navid}, title = {Optimization of Branch Pipe Irrigation Network Using HBMO Algorithm}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {616-626}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {The initial cost of pressurized irrigation network is the most important issue for this method’s development. Searching for the optimization diameter of pressurized branches could guarantee the suitable design as well as having a high effect on costs reduction. Different methods of optimization have been considered so far. In this research, the HBMO algorithm has been used as one of the optimization metaheuristic methods for pressurized branched irrigation networks design. The research will introduce this method and its application in minimizing the pressurized branched irrigation network’s cost. Also the obtained results of this application in designing two networks, a real network with other current methods within pressurized branched irrigation networks such as mougnie velocity, recommended velocity, linear programming, labye, lagrange multipliers, and recursive design, has been compared. The results of this research showed that HBMO algorithm in comparison with other methods has the least cost (more than 65 percent difference in comparision with Recommended Velocity method).}, keywords = {HBMO Algorithm,Metaheuristic Algorithm,optimization,Pressurized irrigation}, title_fa = {بهینه‌یابی ابعاد لوله‌های شبکه آبیاری تحت‌فشار شاخه‌ای با استفاده از الگوریتم زنبورعسل}, abstract_fa = {هزینه‌های اولیه احداث شبکه‌های آبیاری تحت‌فشار مهم­ترین مساله برای توسعه این روش می‌باشد که جستجوی قطر بهینه لوله‌های تحت‌فشار می‌تواند ضمن تضمین طراحی مناسب، تأثیر عمده‌ای در کاهش هزینه‌ها داشته باشد. روش‌های مختلفی برای بهینه‌سازی تاکنون مورد بررسی قرار گرفته که در این مقاله از روش الگوریتم زنبورعسل به­عنوان یکی از روش‌های فراابتکاری بهینه‌سازی برای طراحی شبکه آبیاری تحت‌فشار شاخه‌ای استفاده شده است. در این مقاله ضمن معرفی این روش و نشان دادن کاربرد آن در حداقل‌سازی هزینه طراحی شبکه لوله‌های آبیاری تحت‌فشار، نتایج حاصله از کاربرد آن در طراحی دو شبکه، از جمله یک شبکه با ابعاد واقعی، با دیگر روش‌های متداول در طراحی شبکه‌ لوله‌های آبیاری تحت‌فشار شامل روش‌های سرعت مغنیه، سرعت توصیه شده، شیب هیدرولیکی ثابت، حداکثر سرعت، برنامه‌ریزی خطی، لابیه، ضرایب لاگرانژ و طراحی برگشتی مقایسه گردید. نتایج این تحقیق نشان داد الگوریتم زنبورعسل کم‌ترین هزینه را نسبت به سایر روش‌ها دارد به‌طوری‌که با روش سرعت توصیه شده بیش از 65 درصد اختلاف نشان می‌دهد.}, keywords_fa = {آبیاری تحت‌فشار,الگوریتم زنبورعسل,الگوریتم‌های فراابتکاری,بهینه‌سازی}, url = {https://idj.iaid.ir/article_55708.html}, eprint = {https://idj.iaid.ir/article_55708_51bcb4d452e882c6da3f31fd7bace42b.pdf} } @article { author = {Nozari, Hamed and Liaghat, Abdol Majid}, title = {Management of Agricultural Saline Drainage Using System Dynamics Approach (Case study: Agro-industrial farms of sugarcane Amirkabir unit)}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {627-637}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {The quantity and quality of produced drainage on saline land that needs initial leaching; from starting Irrigation and drainage network up to before reaching balance conditions is constantly changing. The time to reach balance conditions in areas with shallow saline groundwater may take several years. In such cases, knowledge of the quantity and quality of produced drainage in order to manage and control is necessary. Therefore, in this study the performance of a drainage system in non-steady conditions using system dynamics approach is completely modeling and after validity of the model results with field data and verification of the quantity and quality of drainage, management actions that can be applied on such drainage, were modeled. With run of the above model for agro-industrial farms of sugarcane Amirkabir unit, in order to management of Saline drainage these lands, combination of existing solutions such as mixed with irrigation water, using in downstream and cultivation of salt tolerant plants as used simultaneously and Saline drainage rate allocated to each of these methods was determined. The results showed that Salinity of drain water reaches balance condition for first eight years of operation. And the salinity is reduced from 35 to 4.5 dS/m. However, halophytes can be planted and irrigated directly by saline drainage water, after 6 years. Drainage discharge to the river is reduced from 82.7 to 27.7 percent, during the ten years simulated. Finally the recipe for managing saline drainage of above unit lands was presented. }, keywords = {System dynamics approach,Drainage,quantity,Quality,Drainage system}, title_fa = {مدیریت زهاب شور شبکه آبیاری با استفاده از تکنیک تحلیل پویایی سیستم (مطالعه موردی مزارع کشت و صنعت نیشکر واحد امیرکبیر)}, abstract_fa = {کمیت و کیفیت زهاب تولید شده در اراضی شور که نیاز به آبشویی اولیه دارند، از شروع بهره‌برداری از شبکه‌ آبیاری و زهکشی تا قبل از رسیدن به شرایط تعادل، پیوسته در حال تغییر می‌باشد. زمان رسیدن به حالت تعادل در مناطقی با آب زیرزمینی کم عمق و شور ممکن است چندین سال به­طول بیانجامد. در چنین شرایطی، آگاهی از کمیت و کیفیت زهاب تولید شده به­منظور مدیریت و کنترل آن امری ضروری می­باشد. بنابراین در این تحقیق ابتدا عملکرد یک سیستم زهکشی در شرایط غیرماندگار به کمک روش تحلیل پویایی سیستم به­طور کامل مدل‌سازی و پس از اعتباریابی نتایج مدل با داده‌های صحرایی، راهکارهای مدیریتی که می‌توان روی اینگونه زهاب­ها اعمال نمود، مدل‌سازی شد. با اجرای مدل فوق برای مزارع کشت و صنعت نیشکر واحد امیرکبیر، به­منظور مدیریت زهاب شور این اراضی، ترکیبی از راه حل­های موجود به­صورت همزمان به­کار گرفته شد و سهم زهاب شور اختصاص داده شده به هر یک از روش­ها تعیین شد. نتایج نشان داد پس از 8 سال از شروع بهره برداری، شوری زهاب شبکه به حالت تعادل می­رسد و شوری زهاب خروجی از حدود 35 دسی زیمنس بر متر در سال اول به 5/4 دسی زیمنس بر متر می­رسد. هم­چنین پس از گذشت 6 سال از آبیاری کل اراضی نیشکر، می­توان به کشت گیاه شور پسند با زهاب شور و بدون تلفیق با آب آبیاری پرداخت. میزان تخلیه زهاب شور به رودخانه نیز از 7/82 درصد در سال اول به 7/27 درصد در سال دهم کاهش یافت. در نهایت دستورالعملی برای مدیریت زهاب شور اراضی واحد فوق ارائه شد.  }, keywords_fa = {تحلیل پویایی سیستم,زهاب,سیستم زهکشی,کمیت,کیفیت}, url = {https://idj.iaid.ir/article_55709.html}, eprint = {https://idj.iaid.ir/article_55709_48c76a55304a3779f550efe6513a1d24.pdf} } @article { author = {Noshadi, Masoud and Ghahremani, Razeyehe and Sepaskhah, Ali Reza}, title = {Comparison of Drainmod (6) and Modflow (PMWIN) models in estimation of water table fluctuations in land drainage}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {8}, number = {3}, pages = {638-653}, year = {2014}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {In recent decades considerable progress has been made in using computer models of groundwater as a cheap and quick way for investigating the movement, balance and management of groundwater resources. In this research PMWIN and Drainmod (6) models in drainage system were evaluated and compared for two regions, Salami and Kooshkak. The results showed that Drainmod (6) model is suitable for simulation of water table fluctuations in steady state conditions in Salami (rain and irrigation periods) and Kooshkak research station (rainy season) with NRMSE 0.17 and 0.14, respectively, and agreement index (d) of 0.94 and 0.92, respectively, which are very good predictions. But the prediction of water table fluctuation by Drainmod(6) model in Kooshkak was not accurate because of large deviation of field situation from steady state condition. The results showed that the difference between observed and simulated water table depths by PMWIN model is high in both regions with NRMSE between 0.16 and 0.43 in Salami and 0.18 and 0.35 in Kooshkak. The agreement index (d) was between 0.37 and 0.56 in Kooshkak and 0.51 and 0.93 in Salami. Therefore, the PMWIN model did not show acceptable accuracy and is not suitable in drainage projects in the study areas. But, the Drainmod(6) model showed more suitable prediction of water table fluctuations in drained area than PMWIN.}, keywords = {Drainage systems,Drainmod (6) model,evaluation,PMWIN model,Water Table}, title_fa = {مقایسه مدل‌های (6) Drainmod و (PMWIN) Modflowدر برآورد نوسانات سطح ایستابی در اراضی زه‌کشی شده}, abstract_fa = {استفاده از مدل های رایانه­ای آب زیرزمینی در دهه­های اخیر به­عنوان روشی ارزان و سریع در بررسی چگونگی حرکت، بیلان و مدیریت آب­های زیرزمینی پیشرفت قابل توجهی داشته است. در این تحقیق ارزیابی مدل­هایPMWIN  و (6) Drainmod برای شبیه­سازی و برآورد نوسانات سطح ایستابی در سیستم­های زهکشی در دو منطقه سلامی و کوشکک انجام شده و نتایج دو مدل با یکدیگر مقایسه شده­اند. اجرای مدل (6) Drainmod نشان داد که این مدل قادر است سطح ایستابی را در حالت همگام در ناحیه بین دو زهکش در منطقه سلامی (در دوره­های بارش و آبیاری) و ایستگاه تحقیقاتی کوشکک (در دوره بارش) با NRMSE به ترتیب 17/0 و 14/0 و شاخص تطابق (d) به­ترتیب 94/0 و 92/0 شبیه­سازی کند که پیش­بینی خیلی خوبی است. اما پیش­بینی مدل(6) Drainmod در منطقه کوشکک در فصل آبیاری برآورد خوبی از سطح ایستابی نداشته است زیرا شرایط منطقه از حالت همگام انحراف زیادتری داشته است. نتایج اجرای مدل PMWIN نشان داد که اختلاف بین مقادیر عمق سطح ایستابی مشاهده ­شده و شبیه­سازی شده در هر دو منطقه زیاد است و NRMSE در پیزومترها بین 16/0 تا 43/0 در منطقه سلامی و 18/0 تا 35/0 در منطقه کوشکک متغیر می­باشد. شاخص تطابق (d) نیز بین 37/0 تا 56/0 در منطقه کوشکک و 51/0 تا 93/0 در منطقه سلامی متغیر است. بنابراین مدل PMWIN در این دو منطقه دقت قابل قبولی ندارد و در بررسی طرح­های زهکشی نمی­تواند مورد استفاده قرار گیرد ولی مدل (6) Drainmod پیش­بینی مناسب­تری از سطح ایستابی در دو منطقه داشته است.}, keywords_fa = {ارزیابی,سیستم‌های زهکشی,سطح ایستابی مدل (6) Drainmod,مدل PMWIN}, url = {https://idj.iaid.ir/article_55710.html}, eprint = {https://idj.iaid.ir/article_55710_4b06cb5083d96c54c3f4b0bbd20bf122.pdf} }