@article { author = {mohammadi, firouz and hassanzadeh, yousef and Roushangar, kiyoumars}, title = {Determining the Discharge Coefficient of One-Cycle Sharp-Crested U-Shape Weirs Using Kernel-Based SVM Approach}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {14}, number = {5}, pages = {1722-1736}, year = {2020}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {weirs are one of the hydraulic and very vital structures from various economic, environmental, safety and security aspects. In addition to passing and flow measurement, they are the controlling structures in the floods. The main purpose of the present research was to predict the discharge coefficient to method of intelligent support vector machine using experimental data as well as analysis of the hydraulic performance of weirs. The geometric variables of the weirs were used 10, 12.5, and 15 cm in height, the length of different archs were 40.82, 45, and 48.10 cm. To analysis the performance, the dimensional analysis was used by the 𝜋 Bakingham method, then by intelligent method, considering different models, the effect of different parameters in determining the discharge coefficient were investigated. As the length of the weirs arch increases, the discharge efficiency decreases, and as the length of the weirs arch increases, the crest length increases. The results of sensitivity analysis also showed that by removing the Ht/P parameter, the model error rate increases up to 14% for training data series and up to 20% for test data series, and this parameter is the most effective variable in estimating discharge coefficient in in U-shaped labyrinth weirs.}, keywords = {"Arch length,Discharge coefficient,labyrinth weirs,Sensitivity analysis,Support vector machine"}, title_fa = {تعیین ضریب دبی سرریزهای لبه‌تیز کنگره‌ای U شکل تک سیکل با استفاده از روش مبتنی بر کرنل SVM}, abstract_fa = {سرریزها از جمله سازه‌های هیدرولیکی و بسیار حیاتی از جوانب مختلف همچون اقتصادی، زیست محیطی، ایمنی و امنیتی می‌باشند که علاوه بر عبوردهی و اندازه‌گیری جریان، سازه‌ای کنترل کننده در مواقع سیلابی هستند. هدف اصلی تحقیق، تخمین ضریب دبی به روش هوشمند ماشین بردار پشتیبان با کاربرد داده‌های آزمایشگاهی و همچنین تحلیل عملکرد هیدرولیکی سرریزها می‌باشد. در این مطالعه، متغیرهای هندسی سرریزها به ارتفاع‌های 10، 5/12 و 15 سانتی‌متر، طول قوس‌های متفاوت به مقادیر 82/40، 45 و 10/48 سانتی‌متر می‌باشد. برای تحلیل عملکرد از آنالیز ابعادی به روش پی باکینگهام استفاده گردید، سپس با روش هوشمند با در نظر گرفتن مدل‌های متفاوت به بررسی تأثیر پارامترهای مختلف در تعیین ضریب دبی پرداخته شد. با افزایش طول قوس‌ها، راندمان دبی کاهش می‌یابد، با اینکه با افزایش یافتن طول قوس‌سرریزها طول تاج افزایش می‌یابد، راندمان آبگذری سرریز روند کاهشی می‌گیرد. نتایج حاصل نشان ‌داد که روش‌ هوشمند قادر به تخمین ضریب دبی سرریزهای کنگره‌ای U شکل می‌باشد. نتایج تحلیل حساسیت نشان داد که با حذف پارامتر Ht/P میزان خطای مدل برای سری داده‌های آموزش تا 14 درصد و برای سری داده‌های آزمون تا 20 درصد افزایش می‌یابد و این پارامتر موثرترین متغیر در تخمین ضریب دبی در سرریزهای کنگره‌ای U شکل است.}, keywords_fa = {"تحلیل حساسیت,سرریزهای کنگره‌ای,ضریب دبی,طول قوس,ماشین بردار پشتیبان"}, url = {https://idj.iaid.ir/article_122339.html}, eprint = {https://idj.iaid.ir/article_122339_e1c8f62fb68c393b734f10ce7c5f33cf.pdf} }