@article { author = {Parsi, Ehsan and Allahdadi, Kazem and bahrebar, amirreza and farhadi, rasol}, title = {Effect of downstream contraction on side weirs discharge}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {15}, number = {2}, pages = {455-466}, year = {2021}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Side weirs are important structures in irrigation and drainage networks that are used as a protective structure upstream of reverse siphons and road underpasses. In this research, using laboratory data, for two positions of lateral overflow placement diagonally in the width change wall and directly and in the wall without change width, a new relationship based on the critical depth of flow on the weir to determine the discharge discharge weir (QW) are provided in rectangular channels with narrowing downstream of the weir. The results showed that the discharge capacity of oblique weir decreasing width downstream is more than normal overflows and also diagonal weirs located in the width reduction wall are more than the case where the weir is in the direct wall without width reduction. Finally, by comparing the relationships obtained from dimensional analysis in two types of overflows, it can be concluded that the flow rate of side weirs located in the diagonal wall of the transition section is about 7.50 percent higher than the case where the side is located in the direct wall of the weir. The reason is less interference of flow lines. Also, the narrowed part of the downstream acts as a barrier, increasing the depth of flow and less curvature of the flow lines, and the flow passes through this weir with less drop.}, keywords = {Critical depth,Discharge coefficient,weir,width reduction}, title_fa = {اثر تنگ شدگی پایین دست بر روی دبی سرریز جانبی}, abstract_fa = {سرریزهای جانبی از جمله سازه‌های مهم در شبکه‌های آبیاری و زهکشی هستند که به عنوان سازه حفاظتی در بالادست سیفون‌های معکوس و زیرگذر جاده‌ها بکار برده می‌شوند. در این تحقیق با استفاده از داده‌های آزمایشگاهی، برای دو موقعیت قرارگیری سرریز جانبی به صورت مورب و در دیواره تغییر عرض و به صورت مستقیم و در دیواره بدون تغییر عرض، رابطه جدیدی بر اساس عمق بحرانی جریان روی سرریز، برای تعیین دبی تخلیه سرریز های جانبی (QW) در کانال‌های مستطیلی با تنگ‌شوندگی در پایین‌دست سرریز ارائه شده است. نتایج نشان داد که ظرفیت تخلیه سرریز‌های مورب با کاهش عرض در پایین دست بیشتر از سرریزهای نرمال است و همچنین سرریزهای مورب که در دیواره کاهش عرض قرار گرفته‌اند بیشتر از حالتی است که سرریز در دیواره مستقیم و بدون کاهش عرض قرار دارد. و در نهایت با مقایسه روابط بدست امده از انالیز ابعادی در دو نوع سرریز می توان نتیجه گرفت که دبی عبوری سرریزهای جانبی که در دیواره مورب قسمت انتقالی قرار گرفته است حدود 50/7 درصد بیشتر از حالتی است که سرریز در دیواره مستقیم سرریز قرار گرفته که علت آن تداخل کمتر خطوط جریان می‌باشد. همچنین قسمت تنگ‌شده پایین‌دست مانند مانع عمل کرده و باعث افزایش عمق جریان و انحنای کمتر خطوط جریان شده و جریان با افت کمتری از روی این سرریز عبور می کند.}, keywords_fa = {سرریز,ضریب تخلیه,عمق بحرانی,کاهش عرض مقطع}, url = {https://idj.iaid.ir/article_129144.html}, eprint = {https://idj.iaid.ir/article_129144_315540e703261dd3906d58464da5dd9a.pdf} }