@article { author = {Vejahat, Javad and Saraf, Shadi}, title = {Determining the appropriate model for estimating river bed loads}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {15}, number = {4}, pages = {780-793}, year = {2021}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Accurate estimation of sedimentation of a watershed is one of the most important issues in water engineering, river engineering, water resources, water facilities and structures, and the environment for the implementation of development plans and programs. The great variability in the equations has made it difficult to calculate the amount of sediment load in the river and the not exsit of information on how to extract the equations. In this paper, after collecting the necessary information in Benkooh hydrometric station and preparing the riverbed granulation, the amount of river bed load in this hydrometric station, using different regressions and calculating through several experimental relationships used to calculate the amount of sediment load The river floor was calculated. The results of these relationships were compared with the results recorded in the hydrometric station and other relationships used, indicating that the relationship between the tuff and the error rate of 22.71 in the RMSE coefficient of acceptable ability to calculate the amount of bed load in the area Has been studied, so it was chosen as the best model. The effective parameters in the sensativity analysis were analyzed and the results showed that the amount of floor load calculated in this method depends on the value of the flow velocity parameter and changes in water flow velocity in the river have a significant effect on the amount of sediment load.}, keywords = {regressions,Empirical equations,Toffaletti,Sensitivity analysis}, title_fa = {تعیین مدل مناسب برآورد بار کف رودخانه‌ها}, abstract_fa = {برآورد صحیح میزان رسوبدهی یک حوزه آبخیز از مهم‌ترین مسائل مطرح‌شده در مهندسی آب، مهندسی رودخانه، منابع آب، تأسیسات و سازه‌های آبی و محیط‌زیست برای اجرای طرح‌ها و برنامه‌های توسعه‌ای است. تنوع ریاد در معادلات محاسبه مقدار بار رسوب در رودخانه و نبود اطلاعات در مورد نحوه استخراج معادلات، استفاده از آن را مشکل نموده است. در این تحقیق پس از گردآوری اطلاعات لازم در ایستگاه هیدرومتری بنکوه و تهیه دانه‌بندی بستر رودخانه، مقدار بار بستر رودخانه در این ایستگاه هیدرومتری، با استفاده از رگرسیون‌های مختلف و محاسبه از طریق چندین رابطه تجربی استفاده شده برای محاسبه مقدار بار رسوب کف رودخانه، محاسبه گردید. نتایج حاصل از این روابط با نتایج ثبت شده در ایستگاه هیدرومتری و سایر روابط استفاده شده مورد مقایسه قرار گرفت که نشان دهنده این موضوع بود که رابطه توفالتی با میزان خطای 71/22 در بررسی ضریب RMSE توانایی قابل قبولی در محاسبه مقدار بار بستر در منطقه مورد مطالعه دارد، بنابراین به عنوان مدل مورد نظر انتخاب شد. پارامترهای موثر در رابطه توفالتی آنالیز حساسیت شدند و نتایج نشان داد که مقدار بار کف محاسبه شده در این روش بیش از همه به مقدار پارامتر سرعت جریان وابسته است و تغییرات سرعت جریان آب در رودخانه، تاثیر به سزایی در مقدار بار رسوبی کف دارد. .}, keywords_fa = {رگرسیون,روابط تجربی,توفالتی,تحلیل حساسیت}, url = {https://idj.iaid.ir/article_134860.html}, eprint = {https://idj.iaid.ir/article_134860_cb71684fe92ba66124991de28d5ac13a.pdf} }