@article { author = {Pazhoohideh, Seyed Kioomars and Egdernezhad, Aslan and Abbasi, Fariborz}, title = {Corn Irrigation Scheduling and Determination of Water and Nitrogen Fertilizer Production Functions Using The Calibrated AquaCrop Model}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {16}, number = {2}, pages = {357-370}, year = {2022}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Corn is one of the most important grain crops in the world. Corn yield and production is highly dependent on water and nitrogen availability. In this study, the calibrated AquaCrop model, using data collected from a research study in Seed and Plant Improvement Institute, Iran, was used to determine the appropriate irrigation amount and nitrogen fertilizer level under field conditions during 2008-2010. In addition, irrigation-yield, fertilizer-yield and irrigation-fertilizer-yield production functions were determined in order to quantify the results. Hence, yield and water use efficiency of corn were simulated by the AquaCrop model under different irrigation amounts (at levels of 30 to 120% of water requirement) and nitrogen fertilizer treatments (at four levels of 100, 80, 60 and zero percent of fertilizer requirement). The results showed that by providing 80% of the total crop irrigation requirement, acceptable amount of yield and water use efficiency will be achieved. However, crop yield and water use efficiency were improved by increasing fertilizer application rate. Results demonstrated that, corn grain yield in W3 treatment was equal to 11, 10.8 and 10.2 ton ha-3 under 100, 80 and 60% fertilizer treatments, respectively. Also, the obtained Water use efficiency of these treatments was equal to 1.45, 1.53 and 1.36 kg m-3, respectively. In addition, a simple form of production functions for both irrigation-yield and fertilizer-yield simulation models were recommended. However, for irrigation-fertilizer-yield production function, the quadratic form was the best suited model among others.}, keywords = {crop growth model,Crop Modeling,Irrigation-fertilizer-yield Function,Quadratic model,Simple Form}, title_fa = {برنامه‌ریزی آبیاری ذرت و تعیین توابع تولید آب و کود نیتروژن مصرفی با استفاده از مدل واسنجی‌شده آکواکراپ}, abstract_fa = {ذرت یکی از مهم‌ترین گیاهان زراعی در جهان است. رشد و عملکرد این گیاه به طور مستقیم وابسته به آب و نیتروژن است. در این پژوهش، برای تعیین مقادیر مناسب آب و کود نیتروژن، از مدل واسنجی‌شده آکواکراپ، براساس داده‌های برداشت شده از طرح پژوهشاتی انجام شده در موسسه پژوهشات اصلاح و تهیه نهال و بذر کرج طی دو سال زراعی (1389-1387)، استفاده شد. هم‌چنین برای کمی‌سازی نتایج، توابع تولید آب-عملکرد، کود-عملکرد و آب-کود-عملکرد تعیین شدند. بدین منظور، عملکرد و کارایی مصرف آب ذرت دانه‌ای توسط مدل آکواکراپ تحت مقادیر مختلف آب آبیاری (در سطوح 60، 80، 100 و 120 درصد تأمین نیاز آبی) و کود نیتروژن (در چهار سطح 100، 80، 60 و صفر درصد نیاز کودی) مورد شبیه‌سازی قرار گرفت. نتایج نشان داد که با تأمین 80 درصد آب آبیاری (W3)، عملکرد قابل قبول و کارایی مصرف آب بیش‌تری نسبت به سایر تیمارها حاصل شد. اگرچه با افزایش کود مصرفی، عملکرد و کارایی مصرف آب نیز بهبود یافت. به-طوری که عملکرد دانه ذرت در تیمار W3 برای مقادیر 100، 80 و 60 درصد نیاز کودی به‌ترتیب برابر با 11، 8/10 و 2/10 تن در هکتار و کارایی مصرف آب برای این تیمارها به‌ترتیب برابر با 45/1، 53/1 و 36/1 کیلوگرم بر مترمکعب بود. هم‌چنین صورت‌های ساده برای توابع آب- عملکرد و کود- عملکرد و صورت درجه دوم برای تابع آب- کود- عملکرد به عنوان توابع تولید مناسب انتخاب شدند.}, keywords_fa = {آکواکراپ,تابع تولید,کم‌آبیاری,مدل‌سازی‌ گیاهی}, url = {https://idj.iaid.ir/article_149111.html}, eprint = {https://idj.iaid.ir/article_149111_7c169873974df0e4dc5256e3939ab939.pdf} }