@article { author = {Mohammadimoalezade, jamal and Naseri, Abdali and hooshmand, Abdolrahim}, title = {Planning of sugarcane irrigation and soil moisture distribution using AquaCrop model}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {16}, number = {6}, pages = {1245-1254}, year = {2023}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Limitation of water resources, lack of irrigation planning and undesirable use of water are the main factors limiting agricultural development and increasing food production in Iran. Plant and mathematical models are suitable tools for improving irrigation management, crop increase and irrigation efficiency to simulate soil moisture estimation and plant irrigation planning. This study was conducted in 2017 with the aim of investigating the ability of AquaCrop model to irrigate and estimate soil moisture in sugarcane cultivation lands located in the south of Khuzestan province. The results of soil moisture simulation and irrigation planning were compared with the values measured in the field by AquaCrop model. Overall, the results showed that the accuracy of the model in estimating irrigation planning is more than the soil moisture estimation. The accuracy of the model was somewhat higher in estimating soil moisture with the measured values at the farm level. So that the mean square tide of error (RMSE), tide mean squares of normalized error (NRMSE), coefficient of determination (R²), compatibility index (d) and residual coefficient (CRM) were 2.12%, 0.08, 0.71, 0.88 and -0.035, respectively. Also, the results of simulation of sugarcane irrigation round in the field showed that four irrigation rounds, which on average were 4800 cubic meters per hectare, were saved compared to the control farms. The yield of this field was 128 tons per hectare and the average yield of control farms was 103.60 tons per hectare. The results showed that AquaCrop model can be used as a suitable method for planning and irrigation management of sugarcane cultivation lands.}, keywords = {soil moisture,Irrigation management,Irrigation planning,AquaCrop}, title_fa = {برنامه ‏ریزی دور آبیاری گیاه نیشکر و توزیع رطوبت خاک با مدل AquaCrop}, abstract_fa = {محدودیت منابع آب، عدم برنامه‏ ریزی آبیاری و استفاده نامطلوب از آب، عامل اصلی محدود کننده توسعه کشاورزی و افزایش تولیدات غذایی در ایران است. مدل‏ های گیاهی و ریاضی برای شبیه‏ سازی برآورد رطوبت خاک و برنامه ‏ریزی آبیاری گیاه، ابزار مناسبی برای بهبود مدیریت آبیاری، افزایش محصول و راندمان آبیاری می‏ باشند. این پژوهش در سال 1396 با هدف بررسی توانایی مدل AquaCrop در برنامه ‏ریزی آبیاری و برآورد رطوبت خاک در اراضی کشت نیشکر دعبل خزاعی واقع در جنوب استان خوزستان انجام شد. به‏ همین‏ منظور نتایج شبیه‏ سازی رطوبت خاک و برنامه‏ ریزی آبیاری توسط مدل AquaCrop با مقادیر اندازه‏ گیری شده در مزرعه مقایسه شد. به‏ طور کلی نتایج نشان داد، دقت مدل در برآورد برنامه ‏ریزی آبیاری، از برآورد رطوبت خاک بیشتر است. دقت مدل در برآورد رطوبت خاک با مقادیر اندازه‏ گیری شده در سطح مزرعه به طور میانگین تا 2.25 درصد بیشتر نشان داد. به‌طوری‌که جزر میانگین مربعات خطا (RMSE)، جزر میانگین مربعات خطا نرمال شده (NRMSE)، ضریب تعیین (R²)، شاخص سازگاری (d) و ضریب باقیمانده (CRM) به ترتیب 2.12درصد، 0.08، 0.71، 0.88 و 0.035 - به دست آمد. همچنین نتایج شبیه‏ سازی دور آبیاری نیشکر در مزرعه نشان داد تعداد 4 دور آبیاری به طور میانگین معادل 4800 مترمکعب در هر هکتار نسبت به مزارع شاهد صرفه‏ جویی شد. میزان عملکرد محصول این مزرعه 128 تن در هکتار و متوسط عملکرد مزارع شاهد برابر103.60 تن در هکتار بدست آمد. نتایج تحقیقات نشان داد که مدل AquaCrop می‏تواند روش مناسبی برای برنامه ‏ریزی و مدیریت آبیاری اراضی کشت نیشکر مورد استفاده قرار بگیرد.}, keywords_fa = {رطوبت خاک,مدیریت آبیاری,برنامه &rlm,ریزی آبیاری,AquaCrop}, url = {https://idj.iaid.ir/article_163508.html}, eprint = {https://idj.iaid.ir/article_163508_8254dbd05d63f155646dd707f4ecd8a2.pdf} }