@article { author = {Moradi Kashkooli, Shahla and Hashemi, Seyed Reza and Khashei suiki, Abbas and Shahidi, Ali}, title = {Simulation of movement of water and solutes in soil by HYDRUS model to determine the suitable depth of dripper}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {10}, number = {1}, pages = {94-103}, year = {2016}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Irrigation with saline waters and solute transport to soil surface by capillary can accumulate solutes. Current study have been carried out to simulate the water flow and solute transport in soil by Hydrus model in order to determine the suitable depth of dripper in the grape garden that was located in Amirabad village in Birjand city in 2015.Samples were taken from the 0, 30, 60 and 90 cm of soil during the 3 irrigation interval and then the amount of soil sample moisture have been determined in the laboratory then the amount of moisture have been entered in Hydrus- 1D model. The amount of soil hydraulic parameters have been determined by inverse solution. Outputs of Hydrus- 1D have been entered in Hydrus- 3D model and the model have been executed. Results indicated that the amounts of Root Mean Square Weighted Error (RMSE), Mean Weighted Absolute Error (MAE) were 9 and 6 percent, respectively. According to the moisture and salinity profiles obtained from Hydrus-3D model, it was suggested to place dripper in depth of 32 cm. In order to check the accuracy of suggested depth Some Scenarios have been considered in Hydrus-2D model. In this scenarios, the dripper have been placed in the depths of 15, 20 and 25 cm. According to the obtained concentration profiles at the end of the simulation period for the mentioned depths, when the dripper have been placed in the depth of 25 cm, the amount of solute accumulation reaches to zero at the soil surface that confirms the results obtained by Hydrus-3D so it is better to place dripper in the depth of 25-32 cm.   }, keywords = {Saline waters,Grape Garden,The depth of placing dripper,Solute profile}, title_fa = {شبیه‌سازی حرکت آب و انتقال املاح در خاک با استفاده از مدل هایدروس جهت تعیین عمق بهینه کارگذاری قطره‌چکان}, abstract_fa = {آبیاری با آب­های شور و حرکت املاح به سطح خاک توسط جریان مویینگی می­تواند باعث تجمع املاح شود. تحقیق کنونی با هدف شبیه­سازی حرکت آب و املاح در خاک با استفاده از مدل هایدروس، جهت تعیین عمق مناسب کارگذاری قطره­چکان در باغ انگور واقع در روستای امیرآباد از توابع شهرستان بیرجند در سال 1394 انجام شد. در فاصله بین سه دور آبیاری نمونه­های خاک از اعماق 0، 30، 60 و 90 سانتی‌متری برداشت شده و رطوبت آن­ها در آزمایشگاه تعیین گردید سپس مقادیر رطوبت در مدل هایدروس یک‌بعدی وارد شد. مقادیر پارامترهای هیدرولیکی خاک با استفاده از روش مدل‌سازی معکوس تعیین شدند. خروجی­های مدل هایدروس یک­بعدی وارد مدل هایدروس سه‌بعدی شده و مدل اجرا گردید. نتایج نشان داد که مقادیر شاخص‌های RMSE وMAE به ترتیب برابر 9 و 6 درصد بوده و با توجه به پروفیل رطوبت و املاح به­دست آمده از مدل هایدروس سه­بعدی، عمق 32 سانتی­متر برای نصب قطره­چکان پیشنهاد گردید. برای بررسی صحت این عمق، سناریوهایی در مدل هایدروس دوبعدی درنظر گرفته شده و مدل اجرا گردید. در این سناریوها قطره‌چکان در عمق 15، 20 و 25 سانتی‌متری زیر سطح خاک درنظر گرفته شدند. با توجه به پروفیل­های املاح به­دست آمده در انتهای دوره شبیه­سازی برای این عمق­ها، مقدار تجمع املاح برای زمانی­که قطره­چکان در عمق 25 سانتی­متری خاک قرار می­گیرد، در سطح خاک به صفر می­رسد که این سناریو نتایج حاصل از مدل هایدروس سه­بعدی را تایید نمود لذا عمق 25 تا 32 سانتی­متر بهترین عمق برای کارگذاری قطره‌چکان تعیین گردید.   }, keywords_fa = {آب‌های شور,باغ انگور,پروفیل املاح,عمق نصب قطره‌چکان}, url = {https://idj.iaid.ir/article_55272.html}, eprint = {https://idj.iaid.ir/article_55272_6c6a1a4efd5d93d13ff729c9ee2f6ad7.pdf} }