@article { author = {Amiri, Zahra and Gheysari, Mehdi and Sadeghi-Nazarabadi, Hooman}, title = {Investigation of Physical Filteration and Hydraulic Performance of Geotextile Filters under Wastewater application}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {10}, number = {3}, pages = {307-315}, year = {2016}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {The aim of this study was to investigate the feasibility of the use of geotextile filters to decrease suspended materials of wastewater to use in trickle irrigation systems to perform the experiment, a metal box was designed and made. Experimental treatments included four wastewater heads which were continued until clogging occurred. Outflow index, wastewater heads between geotextile layers, influent and effluent TSS (Total Suspended Solids) from filtration system were measured at specific times. The results showed that clogging rate of geotextile filters depends on physical and biological parameters. Furthermore, these results indicate that flow rate variation and wastewater head loss were the same while passing the geotextile layers and was independent of the clogging factor. However, the clogging time was related to the parameters of the swage quality. The flow rate trend variation versus time was linear with dramatic change at the beginning of experiment. However, after a while, it became logarithmic and slow. The decrease in flow rate for the 70-cm height of wastewater head was 8.83 lit/s/m until 27 mintutes of the beginning of the experiment and 3.47 lit/s/m at 56 mintutes of the end of experiment, respectively. In this study, some equations were developed to model the flow rate and wastewater head loss (RMSE= 9.6%, R2=0.86), clogging of the filtration system and wastewater head loss (R2=0.968 RMSE=0.773Lit/s/m). Our results confirmed the accuracy of the models.}, keywords = {Municipal sewage,treatment,Geotextile,Modeling,hydraulic}, title_fa = {بررسی تصفیه فیزیکی و عملکرد هیدرولیکی فیلتر ژئوتکستایل در کاربرد پساب}, abstract_fa = {هدف از این پژوهش بررسی امکان استفاده از فیلتر ژئوتکستایل برای کاهش مواد معلق پساب، به منظور استفاده در سیستم آبیاری قطره­ای بود. برای این منظور یک جعبه فلزی با شش لایه فیلتر ژئوتکستایل طراحی و ساخته شد. آزمایش­ها در چهار ارتفاع سطح پساب تا زمان گرفتگی فیلتر­ها انجام شد. شاخص دبی خروجی از سیستم فیلتراسیون، ارتفاع سطح پساب بین لایه­های ژئوتکستایل و کل مواد معلق پساب ورودی و خروجی از سیستم فیلتراسیون در زمان­های معین اندازه­گیری شد. نتایج نشان داد که سرعت گرفتگی فیلتر ژئوتکستایل به عوامل فیزیکی و بیولوژیکی بستگی دارد. هم­چنین نتایج نشان داد که روند تغییرات دبی و افت سطح پساب نسبت به زمان حین عبور از لایه ژئوتکستایل یکسان و مستقل از عامل گرفتگی است. اما زمان گرفتگی بستگی به پارامترهای کیفی پساب داشت. روند تغییرات دبی نسبت به زمان در ابتدا سریع و خطی و با گذشت زمان روند آرام­تر و لگاریتمی بود. برای ارتفاع سطح پساب 70 سانتی­متر، میزان دبی پس از 27 دقیقه از شروع آزمایش 83/8 لیتر بر ثانیه بر متر و پس از 56 دقیقه از شروع آزمایش 47/3 لیتر بر ثانیه بر متر بود. در این تحقیق روابطی برای شبیه­سازی دبی عبوری و میزان افت سطح پساب (RMSE= 9.6%, R2=0.867) و گرفتگی سیستم فیلتراسیون و افت سطح پساب (R2=0.968 RMSE=0.773Lit/s/m,) توسعه داده شد که نتایج ارزیابی دقت مدل­ها را تایید می­کند.}, keywords_fa = {پساب شهری,تصفیه,ژئوتکستایل,مدل‌سازی,هیدرولیک}, url = {https://idj.iaid.ir/article_55353.html}, eprint = {https://idj.iaid.ir/article_55353_f10a49d5c8122bfb9259a8f1c46e957e.pdf} }