@article { author = {Abbaspour, Akram and Abdian Rokni, Mohammad reza}, title = {Study of Hydraulic Jump Characteristics in Diverging Stilling Basins with Square Bars Roughness}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {10}, number = {5}, pages = {636-648}, year = {2016}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Hydraulic jump is the most important phenomenon in the rapid variable flow is of interest to hydraulic engineers. It has been used for dissipation of kinetic energy downstream of hydraulic structures such as spillways, chutes and gates to protect stilling basin.  This study the roughness of the bed and the divergence of basin have studied simultaneously. The experiments have done with the walls diverging angles of 0, 2, 4, 6 and 8 degrees for six different Froude numbers. In total, 190 tests were performed in the range of 5 to 8 Froude numbers. The relative depth reduction of jump in the angles of 0, 2, 4, 6 and 8 degrees have obtained 10, 17.2, 22, 25 and 25.5% respectively. The average reduction of length jump, T, for the angles of 0, 2, 4, 6 and 8 degrees with the rough bed have obtained 45.5, 55, 56.1, 64 and 66.2% respectively. The man reduction of length jump for the cube bars is 60.3%. The loss of energy in the jump EL is equal to the difference between the specific energy before and after the jump, E2 - E1. The relative energy loss, EL/E1, for the angles of 0, 2, 4, 6 and 8 degrees have obtained 58.5, 62.4, 64.1, 65.9 and 67% respectively. In this study, the effect of the square ribs bed on hydraulic jumps was investigated. The divergence of basin without roughness effect also has influenced on reducing the relative length of jump about 37 to 47% and the relative length of jump is proportional to the angle of divergence basin. The results show that both the divergence angle of stilling basin wall and bed roughness of bed have reduced the length and depth of hydraulic jump. This makes it more economical to build a basin and control of jump is better.}, keywords = {Divergent basin,Hydraulic jump,Length of jump,Rough bed,Sequent depth}, title_fa = {بررسی خصوصیات پرش هیدرولیکی در حوضچه آرامش واگرا با بستر زبر مکعب مستطیلی}, abstract_fa = {پرش هیدرولیکی یکی از مهم­ترین پدیده­ها در جریان متغیر سریع است که مورد توجه مهندسین هیدرولیک می­باشد که برای استهلاک انرژی جریان در انتهای ساز­ هایی نظیر سدها، تن آب­ها، آبشارها ودریچه­ها، به منظور حفاظت پایین دست حوضچه آرامش مورد استفاده قرار می­گیرد. در این تحقیق زبری بستر و واگرایی حوضچه به طور هم­زمان بررسی شدند و زبری‌ها در حوضچه‌هایی با دیواره‌های واگرا با زوایای 0، 2، 4، 6 و 8 درجه و هر کدام از این حالت‌ها با 6 عدد فرود (دبی) مختلف آزمایش شده است. در مجموع 190 آزمایش در محدوده اعداد فرود 5 تا 8 انجام شد. مقدار کاهش نسبی عمق مزدوج پرش به طور متوسط برای زوایای انتخابی به ترتیب برابر 10، 2/17، 22، 25 و 5/25 درصد بدست آمد. میانگین کاهش طول نسبی پرش برای زوایای مورد نظر با بستر زبر به ترتیب برابر 5/45، 55، 1/56، 64 و 2/66 درصد بدست آمده است. میانگین کاهش طول پرش هیدرولیکی برای زبری­های مکعب مستطیلی 3/60 درصد بدست آمد. البته واگرایی حوضچه به تنهایی و بدون اعمال زبری نیز تاثیر بسیار زیادی بر کاهش طول نسبی پرش هیدرولیکی بین 37 تا 47 درصد دارد واین کاهش با افزایش زاویه واگرایی حوضچه نسبت مستقیم دارد.  نتایج نشان می­دهد که هر دو عامل واگرایی دیواره حوضچه آرامش و زبری بستر باعث کاهش طول و عمق مزدوج پرش هیدرولیکی می­شوند. این مساله موجب می­شود که ساخت حوضچه اقتصادی­تر شود و کنترل پرش بهتر صورت گیرد}, keywords_fa = {بستر زبر,پرش هیدرولیکی حوضچه واگرا,طول پرش,عمق مزدوج}, url = {https://idj.iaid.ir/article_55431.html}, eprint = {https://idj.iaid.ir/article_55431_e78f8b69d910955bd7fb5daa328cf297.pdf} }