@article { author = {aezzi, soudabeh and khanjani, Mohammad javad and Zounemat-Kermani, Mohammad}, title = {Two Dimensional Simulation of Flow pattern and Bed Changes in Straight and Meandering Channels under the Effect of Spur Dike}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {12}, number = {4}, pages = {970-981}, year = {2018}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Spur dikes as one of the main structures in river restoration practices are used for protecting and shaping the river banks and main channels. These structures growing from the river natural banks, having suitable length and angle relative to the flow direction and cause deviation of the flow from the riversides and driving it to the central axis of the river. In this study, the numerical hydrodynamic and sediment transport model “CCHE2D” was used to simulate the flow pattern and streambed changes around the spur dikes. Two separate series of experimental data were used to assess the numerical model outputs. The accuracy of the model outputs were evaluated through common statistical parameters including RMSE, MARE, REmax and R2. Comparison of the experimental results with the simulated values revealed that the CCHE2D was reasonably capable to simulate the flow pattern around the both of single and series of spur dikes with high accuracy (correlation coefficient=0.755-0.955). The bed changes around the series of spur dikes were simulated with acceptable accuracy, revealed that the CCHE2D model could precisely predict the maximum scouring depth with correlation coefficient of 0.990, but overestimated the width of scour hole around the spur dike in comparison with experimental observations. Furthermore, both the numerical results and experimental observations showed that the erosion depth of main channel had a direct relation with the length of spur dike.}, keywords = {Bed change,CCHE2D,Flow Pattern,Meandering channel,Spur Dike}, title_fa = {شبیه سازی دو بعدی الگوی جریان و تغییرات بستر در آبراهه های مستقیم و پیچانرودی تحت تاثیر سازه آبشکن}, abstract_fa = {آبشکن‌ها یکی از سازه‌های مهم ساماندهی رودخانه به شمار می آیند، که برای حفاظت و شکل دادن به سواحل و آبراهه‌ها مورد استفاده قرار می گیرند. این سازه ها با طول و زاویه مناسب نسبت به راستای جریان از دیواره طبیعی رودخانه توسعه یافته، سبب انحراف جریان از کناره‌ها و هدایت آن به سمت محور مرکزی رودخانه می گردند. در این تحقیق، با استفاده از مدل عددی هیدرودینامیکی و انتقال رسوب CCHE2D به شبیه سازی الگوی جریان و تغییرات بستر آبراهه در اطراف سازه آبشکن پرداخته شد. برای ارزیابی درستی خروجی های این مدل عددی، نتایج آن با مقادیر مشاهداتی دو تحقیق آزمایشگاهی جداگانه که در این خصوص صورت گرفته بود مقایسه گردید. دقت نتایج به دست آمده از مدل در مقایسه با نتایج آزمایشگاهی، با استفاده از پارامتر‌های آماری RMSE، MARE، maxRE و 2R ارزیابی گردید. مقایسه نتایج آزمایشگاهی با نتایج حاصل از مدل عددی CCHE2D نشان می دهد که این مدل می تواند با دقت مناسبی (ضریب تعیین بین 755/0 تا 955/0) الگوی جریان را در اطراف آبشکن های منفرد و سری آبشکن ها شبیه سازی نماید. همچنین تغییرات بستر آبراهه، حول سری آبشکن با دقت قابل قبولی شبیه سازی شد، که نشان داد مدل CCHE2D با دقت بالایی (ضریب تعیین 99/0) عمق آبشستگی بیشینه را پیش بینی می نماید، اما عرض چاله آبشستگی را در اطراف آبشکن، خیلی بیشتر از مقادیر مشاهده شده آزمایشگاهی نشان می دهد. علاوه بر این، نتایج مدل عددی نشان داد که عمق فرسایش کانال اصلی با طول آبشکن در سری آبشکن ها رابطه مستقیم دارد که مشاهدات آزمایشگاهی نیز این مسئله را تایید کردند.}, keywords_fa = {آبشکن,الگوی جریان,پیچانرود,تغییرات بستر,مدل CCHE2D}, url = {https://idj.iaid.ir/article_79407.html}, eprint = {https://idj.iaid.ir/article_79407_c7e9acddbac314c38d79590cbe139ea2.pdf} }