@article { author = {Karimi, Shokooh and Egdernezhad, Aslan and Nakhjavanimoghaddam, Mohammad Mehdi}, title = {Evaluation of SWAP Model for Simulation of Early and Mid Corn in Different Plant Densities under Sprinkler Irrigation}, journal = {Iranian Journal of Irrigation & Drainage}, volume = {14}, number = {6}, pages = {1893-1907}, year = {2021}, publisher = {Iranian Irrigation and Drainage Association}, issn = {2008-7942}, eissn = {2676-6884}, doi = {}, abstract = {Corn is one of the most important agricultural crops in Iran. In order to achieve appropriate yield, biomass and water use efficiency, it is necessary to evaluate the effect of irrigation amounts, cultivar types and plant densities on corn yield. Because of time-consuming and high cost in field studies, crop models have been proposed to study mentioned scenarios. In order to evaluate SWAP, a field study was conducted on two maize cultivars (V1 and V2 representing median cultivar SC500 and early cultivar Sc302, respectively) under different plant densities (D1, D2 and D3 representing 75000, 85000 and 95000 plants.ha-1, respectively, for SC500 and 80000, 90000 and 100,000 plants.ha-1 for SC302 cultivar) with different irrigation volumes (I1, I2 and I3 indicate as 75, 100 and 125% irrigation demand, respectively) in Karaj during two years (2006-2007). Results showed that SWAP had the best accuracy to simulate corn yield in V1, I3 and D3 in comparison to other treatments. SWAP accuracy was better in V2, I3 and D2 treatments for simulation of corn biomass. The model precision for water productivity was better in both cultivars, I3 and D3. In general, based on normalized root mean square error, the model accuracy for simulation of corn yield, biomass and water productivity were 0.14, 0.13 and 0.16, respectivly. SWAP efficiencies for mentioned parameters, with values equal to 0.98, were acceptable. So, it is proposed to use SWAP for simulation of yield, biomass and water use efficiency under above mentioned treatments.}, keywords = {Copping Model,Irrigation Amount,Plant Densities,Water productivity}, title_fa = {ارزیابی مدل SWAP برای شبیه‌سازی دو رقم زودرس و متوسط‌رس ذرت دانه‌ای در تراکم‌های مختلف کاشت تحت آبیاری بارانی}, abstract_fa = {برای دستیابی به عملکرد دانه، زیست‌توده و بهره‌وری آب مناسب برای ذرت دانه‌ای، نیاز است عوامل مختلفی از جمله مقدار آب آبیاری، رقم و تراکم کشت این محصول در مناطق مختلف کشور بررسی شود. به دلیل هزینه‌بر و زمان‌بر بودن انجام آزمایش‌های مزرعه‌ای، استفاده از مدل‌های گیاهی پیشنهاد شده است. از این رو، به منظور ارزیابی مدل گیاهی SWAP، آزمایشی دو ساله (86-1385( برای دو رقم ذرت دانه‌ای (V1 و V2 به ترتیب نشان دهنده ارقام متوسط‌رس SC500 و زودرس SC302) تحت تراکم‌های کشت مختلف (D1، D2 و D3 به ترتیب نشان دهنده 75000، 85000 و 95000 بوته در هکتار برای رقم SC500 و 80000، 90000 و 100000 بوته در هکتار برای رقم SC302) با مقادیر مختلف آبیاری (I1، I2 و I3 به ترتیب نشان دهنده مقادیر 75، 100 و 125 درصد آبیاری) در شهرستان کرج انجام شد. نتایج نشان داد، در رقم V1، مقدار آب آبیاری I3 و تراکم D3، مدل SWAP دقت بالاتری برای شبیه‌سازی عملکرد دانه ذرت داشت. در شبیه‌سازی زیست‌توده ذرت دانه‌ای، دقت مدل SWAP برای رقم V2، مقدار آب آبیاری I3 و تراکم D2 و در شبیه‌سازی بهره‌وری آب، دقت این مدل برای هر دو رقم، مقدار آب آبیاری I3 و تراکم D3 مناسب‌تر از سایر تیمارها بود. به‌طور کلی، براساس آماره میانگین مربعات خطای نرمال شده، دقت این مدل برای شبیه‌سازی عملکرد، زیست‌توده و بهره‌وری آب ذرت دانه‌ای به ترتیب برابر با 14/0، 13/0 و 16/0 بود. کارایی این مدل نیز برای هر سه پارامتر ذکر شده در دسته عالی قرار داشت و مقدار آن برابر با98/0 بود. بنابراین استفاده از این مدل برای شبیه‌سازی عملکرد، زیست‌توده و بهره‌وری آب ذرت دانه‌ای تحت تیمارهای مذکور پیشنهاد می‌شود.}, keywords_fa = {بهره‌وری آب,تراکم بوته,مدل‌سازی گیاهی,مقادیر آبیاری}, url = {https://idj.iaid.ir/article_125359.html}, eprint = {https://idj.iaid.ir/article_125359_e99abcdba4b72690a4ef30a4287a361d.pdf} }